Disclaimers - Suunto Memory Belt User Manual

9. DISCLAIMERS

USER'S RESPONSIBILITY
This instrument is intended for recreational use only. Suunto Memory Belt must not be used
as a substitute for obtaining measurements that require professional precision and must not
be used to obtain measurements that require laboratory-quality measurements.
CE
The CE mark is used to mark conformity with the European Union EMC directives 89/336/
EEC and 99/5/EEC.
ICES
This Class [B] digital apparatus complies with Canadian ICES-003.
FCC COMPLIANCE
This device complies with Part 15 of the FCC limits for class B digital devices. This equip-
ment generates, uses, and can radiate radio frequency energy and, if not installed or used in
accordance with the instructions, may cause harmful interference to radio communications.
There is no guarantee that interference will not occur in a particular instance. If this equip-
ment does cause harmful interference to other equipment, try to correct the problem by relo-
cating the equipment.
Consult an authorized Suunto representative or other qualified service technician if you can-
not correct the problem. Operation is subject to the following conditions:
(1) This device cannot cause harmful interference.
(2) This device must accept any interference received, including interference that may cause
undesired operation.
Repairs should be made by authorized Suunto service personnel. Unauthorized repairs will
void warranty.
Tested to comply with FCC standards. For home or office use.
FCC WARNING:
Changes or modifications not expressly approved by Suunto Oy could
void your authority to operate this device under FCC regulations.
18