Table of Contents
Advertisement
Available languages
Available languages
Configuration Menu
Audio Settings
Access the following audio settings from the Audio menu.
MODE
Output Mode
STEREO
Stereo
MIXMODE
MixMode
HIBOOST
High-Frequency EQ Boost
OFF
No boost (flat).
4 dB
4 dB boost at 10 kHz.
2 dB
2 dB boost at 10 kHz.
V LIMIT
Volume Limiter
V LIMIT
Turns limiter on (ON) or off (OFF) .
VALUE
3 to 9: analogous to volume knob position (for example, 5
is equal to the 5th dot on the volume knob).
BAL ST / BAL MX
Balance
▼▲ Buttons
Left and right balance for earphones when in stereo mode,
or mix of left and right channel for MixMode
GAIN
Output Gain
HIGH
Increases gain by 10 dB
STANDARD(STD)
0 dB of gain.
RF Settings
Access the following RF settings from the RADIO menu.
RADIO
G:
Group number. Each group contains channels selected to work well
together in a single installation.
CH:
Channel number. Sets the receiver to a channel in the selected
group.
888.888 MHz
Displays the frequency to which the receiver is set. Highlight and
use the ▼▲ buttons to set to a specific frequency.
SQUELCH
Adjusts the squelch setting.
RF PAD
Attenuates antenna signals in 3 dB increments.
Utilities and Display Settings
Access the following settings from the UTILITIES menu.
UTILITIES
CUEMODE
Enters CUEMODE (to exit, press enter and select EXIT CUEMODE)
DISPLAY
Change the display settings on the bodypack
CONTRAST
Sets display brightness to high, low, or medium.
LOCK PANEL
Locks all controls except power and volume.To unlock, press exit,
select OFF, and press enter.
BATTERY
Displays the following: Hrs: Min Left, temperature, Status, Cycle
Count, and Health.
RESTORE
Returns receiver to factory default settings.
5
Advertisement
Table of Contents
