NEC MultiSync LCD1990FXp User Manual page 15

Controls
OFF TIMER: Monitor will automatically power down after a user-determined
length of time passes. Before powering off, a message will appear on the
screen asking the user if they want to delay the turn off time by 60 minutes.
Press any OSM button to delay the turn off time.
IPM: The Intelligent Power Manager allows the monitor to enter into a power
saving mode after a period of inactivity. The IPM has two settings.
STANDARD: Monitor enters power save mode automatically when the input
signal is lost.
OPTION: Monitor enters power save mode automatically when the amount of
surrounding light goes below the level that is determined by the user. The level
can be determined in Tag 5 of the Advanced OSM Control menu.
When in power save mode, the LED on the front of the monitor become dark
green or blue.
While in power save mode, push any of the front buttons, except for POWER
and SELECT to return to normal operation.
When the amount of surrounding light returns to normal levels, the monitor will
automatically return to normal mode.
HOT KEY: When this function is activated, the brightness and contrast of the
monitor can be adjusted without entering the OSM menu.
The "Left" or "Right" buttons adjust the brightness level.
The "Down" or Up" buttons adjust the contrast level.
FACTORY PRESET: Selecting the factory preset allows the user to reset most of
the OSM control settings back to the factory settings.
Individual settings can be reset by highlighting the control that needs to be reset,
and pressing the RESET button.
MENU Tools
LANGUAGE: OSM control menus are available in eight languages.
OSM LEFT/RIGHT: You can choose the location where the OSM appears on
your screen. The LEFT/RIGHT submenu moves the OSM horizontally.
OSM DOWN/UP: You can choose the location where the OSM appears on
your screen. The DOWN/UP submenu moves the OSM vertically.
– continued
13