Removing The Case Unit; Removing The Monitor Pcb - Pioneer AVH-P6800DVD Service Manual

1
- Removing the Case Unit (Fig.5)
1
Remove the two screws and then
A
remove the Holder.
2
Remove the eight screws and then
remove the Case Unit.
B
Caution:
When assembling the case unit, be careful not
to nip (damage) the touch-panel's tail (left side) and FFC
with back of the case.
-
Removing the Monitor PCB (Fig.6)
1
Disconnect the four connectors.
2
Remove the five screws and then
C
remove the Monitor PCB.
About handling of touch panel
When replacing the touch panel
(hereafter, "panel") located below the LCD panel,
pay attention to the following.
- The panel is made of glass. So, be careful not to
break or damage it.
- Do not leave your fingerprints on the panel display.
- The four sides and corners of the glass panel are sharp.
D
So, handle it carefully to avoid any injury.
E
F
158
1
2
2
2
2
2
2
1
2
AVH-P6800DVD/UC
2
3
Case Unit
Holder
2
1 1
2
Monitor PCB
2
1
1
3
4
2
2
Fig.5
2
1
2
Fig.6
4