1
7. GENERAL INFORMATION
7.1 DIAGNOSIS
7.1.1 DISASSEMBLY
A
- Preparation for Removing the Monitor Assy
To remove the Monitor Assy block, it must always be moved to the OPEN position.
1. Rotate the gear using a screwdriver, etc. (ø2.8 or smaller) from the slit on the bottom surface of the main
unit (Fig.1) in the direction of the arrow, and move the Grille Assy to OPEN position.
Note)
Though the gear is heavy, please turn carefully not to inflict too much force. Turning with excessive force may
cause damage in the rack or gear in the driving section.
B
C
D
E
F
156
1
2
FRONT
AVH-P6800DVD/UC
2
3
Fig.1
3
4
4