Automatic Light Control; High Beam; Headlight Flash - Vauxhall Adam Owner's Manual

106 Lighting
When switching on the ignition,
automatic light control is active.
When headlights are on, 8
illuminates. Control indicator 8
3 88.
Tail lights
Tail lights are illuminated together
with headlights and sidelights.

Automatic light control

When the automatic light control
function is switched on and the
engine is running, the system
switches between daytime running
light and headlights automatically
depending on the lighting conditions
and information given by the rain
sensor system.
Daytime running light 3 107.
Automatic headlight activation
When the automatic light control
function is switched on and the
engine is running, the headlights are
switched on during poor lighting
conditions.
Furthermore the headlights are
switched on if the windscreen wipers
have been activated for several
wipes.
Tunnel detection
When a tunnel is entered the
headlights are switched on without
any delay.

High beam

To switch from low to high beam,
push lever.
To switch to low beam, push lever
again or pull.

Headlight flash

To activate the headlight flash, pull
lever.