Setting Individual Weekend Days - Worcester DT20RF Instruction Manual

1
2
3 3
4
5 5
6
3rd CH OFF
7
FITTING & OPERATING INSTRUCTIONS FOR WORCESTER BOSCH
DT20RF PROGRAMMER
8-716-106-659 issue a (08.04) UK
RECEIVER
SETTING PROGRAMS

Setting individual weekend days:

Note: if you do not require individual
weekend times, then press ‘set?’ until
normal display is shown.
If you do not wish to change the
settings for 'SAT', then press 'set?'
to move to 'SUN'
Setting CH individual weekend
days:
1 Press 'OK' to select day displayed
2 Press 'OK' to select CH
Note: speed up the display by holding
down the ‘+’ or ‘-’ buttons.
3 Press ‘+’ or ‘-’ to change the ON
time
4 Press ‘set?’ to set the ON time and
select the OFF time
5 Press ‘+’ or ‘-’ to change the OFF
time
6 Press ‘set?’ to set the OFF time and
select the next ON time
Repeat operations 3 to 6 to set the
2nd and 3rd CH ON/OFF times.
Note: after pressing ‘set?’ for the 3rd
CH OFF time the display shows ‘SET’
HW for that day
Setting HW individual weekend
days:
7 Press ‘OK’ to select the first ON time
Repeat operations 3 to 6 to set the
1st, 2nd and 3rd HW ON/OFF times.
Press 'set?' until the display returns
to normal mode.
RECEIVER
SETTING PROGRAMS
13