Receiver Setting Programs; Setting Ch Mon-Fri • Setting Hw Mon-Fri - Worcester DT20RF Instruction Manual

For greenstar si models
Hide thumbs Also See for DT20RF:
Table of Contents

Advertisement

1
5
5
6
7
7
8
3rd CH OFF
10
RECEIVER
SETTING PROGRAMS
2
3
4
9
FITTING & OPERATING INSTRUCTIONS FOR WORCESTER BOSCH
RECEIVER
SETTING PROGRAMS
Setting CH MON - FRI:
1 Press 'set?' until ‘SET’ & 'PROG?'
are shown in the display
2 Press 'OK' to enter program
3 Press 'OK' to select MON-FRI
4 Press 'OK' to select CH
Note: speed up the display by holding
down the ‘+’ or ‘-’ buttons.
5 Press ‘+’ or ‘-’ to change the ON
time
6 Press ‘set?’ to set the ON time and
select the OFF time
7 Press ‘+’ or ‘-’ to change the OFF
time
8 Press ‘set?’ to set the OFF time and
select the next ON time
Repeat operations 5 to 8 to set the
2nd and 3rd CH ON/OFF times.
Note: after pressing ‘set?’ for the 3rd
CH OFF time the display shows ‘SET’
HW MON-FRI
Setting HW MON - FRI
9 Press ‘OK’ to select the first ON time
Repeat operations 5 to 8 to set the
1st, 2nd and 3rd HW ON/OFF times.
Note: after pressing ‘set?’ for the 3rd
HW OFF time the display shows ‘SET’
MON . . . see next page
DT20RF PROGRAMMER
8-716-106-659 issue a (08.04) UK

Advertisement

Table of Contents
loading

Table of Contents