HP 5920 Series Configuration Manual page 38

Tasks at a glance
(Optional.)
(Required.)
(Optional.)
(Optional.)
(Optional.)
(Optional.)
(Optional.)
Creating an HWTACACS scheme
Create an HWTACACS scheme before performing any other HWTACACS configurations. You can
configure up to 16 HWTACACS schemes. An HWTACACS scheme can be referenced by multiple ISP
domains.
To create an HWTACACS scheme:
Step
1. Enter system view.
2. Create an HWTACACS
scheme and enter its view.
Specifying the HWTACACS authentication servers
You can specify one primary authentication server and up to 16 secondary authentication servers for an
HWTACACS scheme. When the primary server is not available, the device tries to communicate with the
secondary servers in the order they are configured, and communicates with the first secondary server in
active state. If no redundancy is needed, specify only the primary server. An HWTACACS server can
function as the primary authentication server in one scheme and as the secondary authentication server
in another scheme at the same time.
To specify HWTACACS authentication servers for an HWTACACS scheme:
Step
1. Enter system view.
2. Enter HWTACACS
scheme view.
Specifying the HWTACACS accounting servers
Specifying the shared keys for secure HWTACACS communication
Specifying a VPN for the scheme
Setting the username format and traffic statistics units
Specifying the source IP address for outgoing HWTACACS packets
Setting HWTACACS timers
Displaying and maintaining HWTACACS
Command
system-view
hwtacacs scheme hwtacacs-scheme-name
Command
system-view
hwtacacs scheme
hwtacacs-scheme-name
30
Remarks
N/A
By default, no HWTACACS
scheme is defined.
Remarks
N/A
N/A