TYAN S1830 User Manual page 51

Tsunami at
Hide thumbs Also See for S1830:
Table of Contents

Advertisement

Hard Disk Power Down Mode
This option specifies the power conserving state that the hard disk drive
enters after the specified period of hard drive inactivity has expired. The
settings are Disabled, Stand By, or Suspend.
Hard Disk Time Out (Minute)
This option specifies the length of a period of hard disk drive inactivity. When
this length of time expires, the computer enters power-conserving state
specified in the Hard Disk Power Down Mode option (see above). The settings
are Disabled, and from 1 to 15 minutes, in one minute intervals.
Power Saving Type
There are several types of sleeping states within the general, global sleep
state. This option allows you to choose how "asleep" you want your system
to be. In deeper sleep modes, more energy is saved. However, upon waking up,
the system must "reorient" itself, and reestablish control over the system's
sleeping components. The settings are POS, Sleep, Stop Clock, and Deep
Sleep. POS is the lightest sleep mode; Deep Sleep is the heaviest.
Standby/Suspend Timer Unit
This option specifies the unit of time used for the Standby and Suspend time
out periods. The settings are 4 msec, 4 sec, 32 sec, or 4 min.
Standby Time Out
This option defines the length of time that the system, while in Full On state,
must be inactive before it enters Standby mode. The settings are Disabled and
from 4 minutes to 508 minutes, in increments of 4 minutes.
Suspend Time Out
This option defines the length of time that the system, while in Standby mode,
must be inactive before it enters Suspend mode.The settings are Disabled and
from 4 minutes to to 508 minutes, in increments of 4 minutes.
Slow Clock Ratio
This option specifies the speed at which the system clock runs in the Standby
Mode power saving state. The settings are expressed as a percentage of the
normal CPU clock speed. The settings are 0-12.5%, 12.5%-25%, 25%-37.5%,
37.5%-50%, 50%-62.5%, 62.5%-75%, or 75-87.5%.
Display Activity
When set to Monitor, this option enables event monitoring on the video
S1830 Tsunami AT
51

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents