Installation Steps; Package Contents - Axis Q1910-E Installation Manual

AXIS Q1910/Q1910-E Installation Guide
AXIS Q1910/Q1910-E Installation Guide
This installation guide provides instructions for installing an AXIS Q1910/Q1910-E Thermal
Network Camera on your network. For all other aspects of using the product, please see the User's
Manual, available from www.axis.com

Installation steps

1. Check the package contents against the list below.
2. Hardware overview. See page 6.
3. Install the hardware.
• Install AXIS Q1910. See page 8.
• Install AXIS Q1910-E. See page 8.
• Connect the cables. See page 9.
4. Assign an IP address. See page 10.
5. Set the password. See page 13.

Package contents

Item
Network camera
Terminal block connector
Camera stand (AXIS Q1910)
Wall bracket (AXIS Q1910-E)
Tools (AXIS Q1910-E)
Network cable (AXIS Q1910-E)
Printed materials
Optional accessories
Models/variants/notes
AXIS Q1910/Q1910-E
4-pin connector for connecting external devices to the I/O terminal
connector
3-pin connector for power connection
2-pin connector for RS-485/422 connection
Metal stand supplied with mounting screws
Wall bracket with internal cable channel
Torx T20 Screwdriver
Allen key
Outdoor network cable 5 m (16 ft.) with gasket
AXIS Q1910/Q1910-E Installation Guide (this document)
Axis Warranty Document
Extra serial number labels (2x)
See www.axis.com for information on power accessories and outdoor
housings, product documentation, installation tools and other software.
Page 5