Safeguards And Warnings - Axis Q1910-E Installation Manual

AXIS Q1910/Q1910-E Installation Guide

Safeguards and warnings

Please read through this Installation Guide carefully before installing the product. Keep the
Installation Guide for further reference.
!
CAUTION! - When transporting the camera, use the original packaging or equivalent to
prevent damage to the product.
!
CAUTION! - Avoid exposing the camera to vibration, shocks or heavy pressure and do
not install the camera on unstable brackets, unstable or vibrating surfaces or walls,
since this could cause damage to the product.
!
CAUTION! - Only use handtools when installing the camera, the use of electrical tools
or excessive force could cause damage to the product.
!
CAUTION! - Do not aim the camera lens toward the sun or other high-intensity
radiation sources since this could cause damage to the sensor.
!
IMPORTANT! - To use AXIS Q1910 outdoors, it must be installed in an approved
outdoor housing. Please install AXIS Q1910-E for outdoor use or see www.axis.com for
more information on outdoor housing and other accessories.
!
IMPORTANT! - The camera should be installed by a trained professional. Please observe
relevant national and local regulations for the installation.
!
IMPORTANT! - Do not install the camera near heat sources since fluctuating
temperatures may affect image quality.
!
IMPORTANT! - This product must be used in compliance with local laws and
regulations.
!
IMPORTANT! - Store and transport the camera in a dry and ventilated environment.
Keep the storage and operating temperature between -40ºC and 50ºC
(-40ºF and122ºF).
Safety Notice - Battery Replacement
The AXIS Q1910/Q1910-E uses a 3.0V CR2032 Lithium battery as the power supply for its internal real-
time clock (RTC). Under normal conditions this battery will last for a minimum of 5 years. Low battery
power affects the operation of the RTC, causing it to reset at every power-up. A log message will appear
when the battery needs replacing. The battery should not be replaced unless required!
• If the battery does need replacing, please contact www.axis.com/techsup for assistance.
• Danger of Explosion if battery is incorrectly replaced
• Replace only with the same or equivalent battery, as recommended by the manufacturer.
• Dispose of used batteries according to the manufacturer's instructions.
Care and Maintenance
• Do not use chemicals, caustic agents, or aerosol cleaners. Use a damp cloth for cleaning.
• Only use accessories and replacement parts provided or recommended by Axis.
• Do not attempt to repair the product by yourself, contact Axis or your Axis reseller for service matters.
Page 3