Table of Contents
Advertisement
QQ
3 7 63 1515 0
◆ 4:3 OUTPUT (DVP-NS52P only)
This setting is effective only when you set
"TV TYPE" in "SCREEN SETUP" to
"16:9." Adjust this to watch 4:3 aspect ratio
progressive signals. If you can change the
aspect ratio on your progressive format
(525p/625p) compatible TV, change the
setting on your TV, not the player. This
setting is effective only when
"PROGRESSIVE AUTO" or
"PROGRESSIVE VIDEO" is selected by
using the PROGRESSIVE button on the front
panel.
FULL
Select this when you can
change the aspect ratio on your
TV.
NORMAL
Select this when you cannot
change the aspect ratio on your
TV. Shows a 16:9 aspect ratio
signal with black bands on left
and right sides of the image.
16:9 aspect ratio TV
TE
L 13942296513
◆ DOWNMIX (DVD VIDEO/DVD-RW only)
Switches the method for mixing down to 2
channels when you play a DVD which has
rear sound elements (channels) or is recorded
in Dolby Digital format. For details on the
rear signal components, see "Checking the
audio signal format" (page 43). This function
affects the output of the following jacks:
– LINE OUT L/R (AUDIO) jacks
– LINE (RGB)-TV jack
– DIGITAL OUT (OPTICAL* or
COAXIAL) jack when "DOLBY
DIGITAL" is set to "D-PCM" (page 69).
DOLBY
Normally, select this position.
SUR-
Multi-channel audio signals are
ROUND
output to 2 channels for enjoying
surround sounds.
NORMAL
Multi-channel audio signals are
downmixed to 2 channels for use
with your stereo.
◆ DIGITAL OUT
Selects if audio signals are output via the
DIGITAL OUT (OPTICAL* or COAXIAL)
jack.
ON
Normally select this position. When
you select "ON," see "Setting the
digital output signal" for further
settings.
OFF
The influence of the digital circuit
upon the analog circuit is minimal.
www
.
http://www.xiaoyu163.com
Custom Settings
(CUSTOM
SETUP)
Use this to set up playback related and other
settings.
Select "CUSTOM SETUP" in the Setup
Display. To use the display, see "Using the
Setup Display" (page 64).
The default settings are underlined.
CUSTOM SETUP
AUTO POWER OFF:
AUTO PLAY:
DIMMER:
PAUSE MODE:
TRACK SELECTION:
MULTI-DISC RESUME:
DivX:
Registration Code
◆ AUTO POWER OFF
Switches the Auto Power Off setting on or
off.
ON
The player enters standby mode
when left in stop mode for more
than 30 minutes.
OFF
Switches this function off.
◆ AUTO PLAY
Switches the Auto Play setting on or off. This
function is useful when the player is
connected to a timer (not supplied).
OFF
Switches this function off.
ON
Automatically starts playback
when the player is turned on by
a timer (not supplied).
◆ DIMMER
Adjusts the lighting of the front panel display.
BRIGHT
Makes the lighting bright.
DARK
Makes the lighting dark.
,continued
Setting the digital output signal
Switches the method of outputting audio
signals when you connect a component such
as an amplifier (receiver) or MD deck with a
digital input jack.
For connection details, see page 20.
Select "DOLBY DIGITAL," "MPEG,"
"DTS," and "48kHz/96kHz PCM" after
setting "DIGITAL OUT" to "ON."
If you connect a component that is
incompatible with the selected audio signal, a
loud noise (or no sound) may be heard from
the speakers, risking damage to your ears or
speakers.
◆ DOLBY DIGITAL (DVD VIDEO/DVD-RW
only)
Selects the type of Dolby Digital signal.
D-PCM
Select this when the player is
connected to an audio
component without a built-in
Dolby Digital decoder. You can
select whether the signals
conform to Dolby Surround
(Pro Logic) or not by making
adjustments to the
"DOWNMIX" item in
"AUDIO SETUP" (page 68).
DOLBY
Select this when the player is
DIGITAL
connected to an audio
component with a built-in
Dolby Digital decoder.
◆ MPEG (DVD VIDEO/DVD-RW only)
Selects the type of MPEG audio signal.
PCM
Select this when the player is
connected to an audio
component without a built-in
MPEG decoder. If you play
MPEG audio sound tracks, the
player outputs stereo signals
via the DIGITAL OUT
(OPTICAL* or COAXIAL)
jack.
MPEG
Select this when the player is
x
ao
u163
y
connected to an audio
component with a built-in
MPEG decoder.
i
* DVP-NS52P only
,continued
http://www.xiaoyu163.com
2 9
8
◆ PAUSE MODE (DVD VIDEO/DVD-RW
only)
Selects the picture in pause mode.
AUTO
FRAME
◆ TRACK SELECTION (DVD VIDEO only)
Gives the sound track which contains the
ON
highest number of channels priority when you
OFF
play a DVD VIDEO on which multiple audio
BRIGHT
AUTO
formats (PCM, MPEG audio, DTS, or Dolby
OFF
Digital format) are recorded.
ON
OFF
AUTO
Notes
• When you set the item to "AUTO," the language
may change. The "TRACK SELECTION" setting
has higher priority than the "AUDIO" settings in
"LANGUAGE SETUP" (page 65).
• If you set "DTS" to "OFF" (page 70), the DTS
sound track is not played even if you set "TRACK
SELECTION" to "AUTO."
• If PCM, DTS, MPEG audio, and Dolby Digital
sound tracks have the same number of channels,
the player selects PCM, DTS, MPEG, and Dolby
Digital audio sound tracks in this order.
◆ MULTI-DISC RESUME (DVD VIDEO/
VIDEO CD only) (DVP-NS33 and DVP-
NS52P only)
Switches the Multi-disc Resume setting on or
off. Resume playback can be stored in
memory for up to 6 different DVD VIDEOs/
VIDEO CDs (page 27).
ON
OFF
◆ DivX
Displays the registration code for this player.
For more information, go to
Q Q
http://www.divx.com
3
6 7
1 3
1 5
on the Internet.
67
68
◆ DTS
Selects whether or not to output DTS signals.
OFF
ON
◆ 48kHz/96kHz PCM (DVD VIDEO only)
Selects the sampling frequency of the audio
signal.
48kHz/16bit The audio signals of DVD
96kHz/24bit All types of signals including
Note
The analogue audio signals from the LINE OUT L/
R (AUDIO) jacks are not affected by this setting
and keep their original sampling frequency level.
co
.
69
70
1-17
DVP-NS30/NS32/NS33/NS52P
9 4
2 8
Settings for the Sound
(AUDIO SETUP)
The picture, including subjects
that move dynamically, is
"AUDIO SETUP" allows you to set the sound
output with no jitter. Normally
according to the playback and connection
select this position.
conditions.
The picture, including subjects
that do not move dynamically,
Select "AUDIO SETUP" in the Setup
is output in high resolution.
Display. To use the display, see "Using the
Setup Display" (page 64).
The default settings are underlined.
AUDIO SETUP
AUDIO ATT:
AUDIO DRC:
DOWNMIX:
DIGITAL OUT:
DOLBY DIGITAL:
MPEG:
DTS:
48kHz/96kHz PCM:
No priority given.
Priority given.
◆ AUDIO ATT (attenuation)
If the playback sound is distorted, set this
item to "ON." The player reduces the audio
output level.
This function affects the output of the
following jacks:
– LINE OUT L/R (AUDIO) jacks
– LINE (RGB)-TV jack
OFF
Normally, select this position.
ON
Select this when the playback sound
from the speakers is distorted.
◆ AUDIO DRC (Dynamic Range Control)
(DVD VIDEO/DVD-RW only)
Makes the sound clear when the volume is
turned down when playing a DVD that
conforms to "AUDIO DRC."
This function affects the output from the
following jacks:
– LINE OUT L/R (AUDIO) jacks
Stores the resume setting in
– LINE (RGB)-TV jack
memory for up to 6 discs.
– DIGITAL OUT (OPTICAL* or COAXIAL)
jack only when "DOLBY DIGITAL" is set
Does not store the resume
to "D-PCM" (page 69).
setting in memory. Playback
restarts at the resume point only
STANDARD Normally select this position.
for the current disc in the player.
TV MODE
Makes low sounds clear even if
you turn the volume down.
WIDE
Gives you the feeling of being
RANGE
at a live performance.
* DVP-NS52P only.
0 5
8
2 9
9 4
Select this when the player is
connected to an audio
component without a built-in
DTS decoder.
Select this when the player is
connected to an audio
component with a built-in DTS
decoder.
VIDEOs are always converted
to 48kHz/16bit.
96kHz/24bit are output in their
original format. However, if the
signal is encrypted for
copyright protection purposes,
the signal is only output as
48kHz/16bit.
m
9 9
OFF
STANDARD
DOLBY SURROUND
ON
D-PCM
PCM
OFF
48kHz/16bit
2 8
9 9
,continued
Hide quick links:
Advertisement
Table of Contents
