Network Settings - NEC NP600 User Manual

Network Settings

http://<the projector's IP address> /index.html
DHCP. . .................................Enabling.this.option.automatically.assigns.an.IP.address.to.the.projector.from.your.DHCP.server..
IP.ADDRESS. . ......................Set. your. IP. address. of. the. network. connected. to. the. projector. when. [DISABLE]. is. selected. for.
SUBNET.MASK....................Set.your.subnet.mask.number.of.the.network.connected.to.the.projector.when.[DISABLE].is.selected.
DEFAULT.GATEWAY. . ...............Set.your.default.gateway.of.the.network.connected.to.the.projector.when.[DISABLE].is.selected.for.
DNS.(PRIMARY). . ................Set.your.primary.DNS.settings.of.the.network.connected.to.the.projector.
DNS.(SECONDARY)..................Set.your.secondary.DNS.settings.of.the.network.connected.to.the.projector.
UPDATE...............................Reflect.your.settings.
TIP: Selecting [NETWORK SETTINGS] for [RESET] from the projector's menu allows you to return the following items to the factory
default.
[DHCP]: DISABLE
[IP ADDRESS]: 192.168.0.10
[SUBNET MASK]: 255.255.255.0
[DEFAULT GATEWAY]: 192.168.01
*[DNS(PRIMARY)] and [DNS(SECONDARY)] will remain unchanged.
Disabling.this.option.allows.you.to.register.the.IP.address.or.subnet.mask.number.obtained.from.
your.network.administrator.
NOTE:
The IP address of the projector is required to change the network setting.
The IP address will not be displayed on the projector's menu.
Consult your network administrator for the IP address when [ENABLE] is selected for [DHCP].
[DHCP].
for.[DHCP].
[DHCP].
NOTE: Close the browser after clicking [UPDATE]. The projector will automatically update your
settings.
42
4. Convenient Features