NEC NP600 User Manual page 23

• Select the source name for its appropriate input connector after turning on the projector.
Input connector
COMPUTER 1 IN
COMPUTER 2(DVI-I)IN
NOTE: The projector is not compatible with video decoded outputs of the NEC ISS-6020 switcher.
NOTE: An image may not be displayed correctly when a Video or S-Video source is played back via a commercially available scan
converter.
This is because the projector will process a video signal as a computer signal at the default setting. In that case, do the following.
* When an image is displayed with the lower and upper black portion of the screen or a dark image is not displayed correctly:
Project an image to fill the screen and then press the AUTO ADJ. button on the remote control or the projector cabinet.
SOURCE button on the projector
cabinet
COMPUTER1
COMPUTER 2(DIGITAL)
or
COMPUTER 2(ANALOG)
2. Installation and Connections
Button on the remote control
(COMPUTER 1)
(COMPUTER 2)
(COMPUTER 2)
4
↓ (Toggle)