NEC colour monitor User Manual page 9

Installation
(Figure C.1). Place the 15-pin VGA to BNC Cable under clip
A (Figure D.1A). Then place the 15-pin VGA to BNC cable
under Clip B (FigureD.1B).
5. Connect the D-SUB cable to D-SUB connector on the back of
the monitor (Figure C.2).
6. Replace connector cover.
NOTE: Incorrect cable connections may result in irregular operation,
damage display quality/components of LCD module and/or shorten the
module's life.
7. Connect one end of the power cord to the AC Adapter and the
other end to the power outlet (Figure E.1).
8. Turn on the monitor (Figure F.1) and the computer.
78134811.PM5 19
E - 9
99.12.24, 2:19 PM