NEC colour monitor User Manual page 10

E - 10
9. To complete the setup of your MultiSync LCD monitor:
A. Set the resolution to 1600 x1200 @60 Hz.
B. Use the following OSM controls:
• Auto Adjust Contrast
• Auto Adjust
• Image Adjust – Fine
NOTE: Manual adjustment of the H/V Position and Image Adjust H.
Size / Fine controls may be required to complete setup of your MultiSync
monitor. For a full description of these OSM controls, refer to the
Controls section of this User's Manual.
10. Refer to User's Manual in the NEC LCD Setup Software CD
case for installation and operation of this software.
NOTE: If you have any problems, please refer to the Troubleshooting
section of this User's Manual.
Figure G.1
Figure A.1
78134811.PM5
Figure H.1
Figure B.1
20
Installation
99.12.24, 2:19 PM