NEC colour monitor User Manual page 16

E - 16
Image Adjust Controls
H. SIZE
Adjusts the horizontal size by increasing or decreasing this
setting.
FINE
Improves focus, clarity and image stability by increasing or
decreasing this setting.
Automatically adjusts the H. Size and Fine settings.
Colour Control System
Five colour presets select the desired colour setting. Each
colour setting is adjusted at the factory.
R,G,B: Increases or decreases Red, Green or Blue colour
depending upon which is selected. The change in colour will
appear on screen and the direction (increase or decrease)
will be shown by the bars.
Tools
OSM H. POS.
OSM V. POS.
You can choose where you would like the OSM control
window to appear on your screen. Selecting OSM Location
allows you to manually adjust the position of the OSM
control menu left, right, up or down.
ALL RESET
Selecting ALL RESET when BNC input is selected allows
you to reset all OSM control settings for the BNC input back
to the factory settings.
Selecting ALL RESET when D-SUB input is selected allows
you to reset all OSM control settings for the D-SUB input
back to the factory settings.
Individual settings can be reset by highlighting the control
to be used and pressing the RESET button.
78134811.PM5 26
Controls
99.12.24, 2:19 PM