Software Restore Or Removal; Hardware Settings; Restoration Process; Powermate Driver Cd - NEC PowerMate CT Service And Reference Manual

Software Restore or Removal

Select the Software tab on the main menu to restore or remove specific applications:
!
Click on one or more programs to select them. Smart Restore indicates a selected program
with a green check mark in front of it. Deselect a selected program by double clicking it.
!
Click on the
!
To remove a program, double click it. A red cross in front of the program indicates it has
been selected for removal. To deselect the program, click on it again.

Hardware Settings

Select the Hardware tab on the main menu to restore hardware settings:
! Click on one or more devices to select them. Smart Restore indicates a selected device with
a green check mark in front of it. To deselect the device, click on it again.
!
Click on the

Restoration Process

Once you have selected the programs or hardware settings you want to restore, click
the restoration process.
Each application or device you selected runs through its installation procedure. Continue as with
a normal installation, selecting the options you want. Each time the application asks you if you
wish to restart your system, select
installation.
When all the selected programs or devices are installed, remove the Product Recovery CD and
store it in a safe place.

PowerMate Driver CD

The PowerMate Driver CD provides drivers for peripheral equipment that is available for
purchase to use with your PowerMate system. The equipment and the drivers are fully tested by
NECC to ensure their compatibility with the PowerMate system. If you need drivers for
peripheral devices you are adding to your system, use this CD.
The PowerMate Driver CD is easy to use. Start the system, and then insert the PowerMate
Driver CD. Follow the on-screen prompts to install the required drivers.

Intel Processor Serial Number Control Utility

The Intel Processor Serial Number Control Utility is a Windows program that enables or
disables the reading of the Pentium III processor serial number by software. This function lets
you control which software programs or websites have permission to read the processor serial
number. When installed, the utility runs automatically each time the system powers on.
Note
The Intel Processor Serial Number Control Utility is for use with systems shipping with
the Intel Pentium III processor. Installing this utility on a system that does not contain a
Pentium III processor generates an error message.
This utility places an icon in the Windows system tray. The icon provides a visual status of the
processor serial number. You have the option of hiding the system tray icon. You can enable or
disable the processor serial number at any time. However, enabling the serial number requires
restarting the system.
Select All button if you want to select all of the listed programs.
Select All button if you want to select all of the listed devices.
Yes to ensure all registry information is correct for the next
to start
OK
System Configuration 2-29