Advertisement
How to Load Smart Restore
To load Smart Restore, click the Windows
If you have not already placed the Product Recovery CD into the CD-ROM drive, do so now.
After the application loads, Smart Restore displays the main menu with a Software tab and a
Hardware tab.
Software Restore or Removal
Select the Software tab on the main menu to restore or remove specific applications:
T
Click on one or more programs to select them. Smart Restore indicates a selected program
with a green check mark in front of it. Deselect a selected program by double clicking it.
T
Click on the
T
To remove a program, double click it. A red cross in front of the program indicates it has
been selected for removal. To deselect the program, click on it again.
Hardware Settings
Select the Hardware tab on the main menu to restore hardware settings:
T
Click on one or more devices to select them. Smart Restore indicates a selected device with
a green check mark in front of it. To deselect the device, click on it again.
T
Click on the
Restoration Process
Once you have selected the programs or hardware settings you want to restore, click
the restoration process.
Each application or device you selected runs through its installation procedure. Continue as with
a normal installation, selecting the options you want. Each time the application asks you if you
wish to restart your system, select
installation.
When all the selected programs or devices are installed, remove the Product Recovery CD and
store it in a safe place.
6 NEC PowerMate ES SlimLine Series Release Notes
Start
button if you want to select all of the listed programs.
Select All
Select All
button if you want to select all of the listed devices.
to ensure all registry information is correct for the next
Yes
button, select
,
Programs
Tools
NEC PowerMate ES SlimLine Series/
, and
.
Restore
to start
OK
Release Notes
455-00307-000
3/2000
Advertisement
