Navman SmartS iCN530 User Manual page 56

iCN 530 | User Manual
5. If prompted to connect your iCN to your computer, complete the following:
• Plug the large end of the USB cable directly into a USB port on your computer (not a USB
hub); plug the small end into the USB Socket on the side of your iCN.
Tip: Where possible, plug the USB cable into a USB port at the back of your computer.
• Plug the small end of the AC Power Pack cable into the Power Socket on the side of your
iCN; plug the other end into the mains.

• Press .
The iCN will turn on.
• When the following screen displays on your iCN, click Next.
• Microsoft ActiveSync will synchronise with your iCN.
You are now ready to install maps to your iCN.
To Open Smart Desktop
Once Smart Desktop has been installed, you can access it from the Start menu:
Start  Programs  Navman  Smart for iCN530
Uninstalling Smart Desktop from your
Computer
We recommend that you use the Add or Remove Programs feature in your Windows Control Panel:
1. Open Add or Remove Programs:
Start  Control Panel  Add or Remove Programs
2. Uninstall:
Note: The name of the program may vary from the above.
Smart Desktop has now been uninstalled from your computer.
Smart for iCN530.
56