Radio - Tune; Manual Tuning; Memory Preset; Fm Allocation Setting - Panasonic SC-PM21 Operating Instructions Manual

Radio – Tune

Manual tuning

Manual tuning
1 Press [TUNER/BAND] to select "FM" or "AM".
2 Press [PLAY MODE] to select "MANUAL".
3 Press [ /REW/4] or [ /FF/¢] to select the
frequency of the required station.
• is displayed when a stereo FM broadcast is being
received.
To tune automatically
Press [ /REW/4] or [ /FF/¢] for a moment until the
frequency starts changing rapidly. The unit begins auto tuning,
stopping when it finds a station.
• Auto tuning may not function when there is excessive
interference.
• To cancel auto tuning, press [ /REW/4] or [ /FF/¢]
once again.
• Sound is momentarily interrupted if you load or unload
tapes while listening to an AM broadcast.
To improve FM sound quality To improve FM sound quality
Press and hold [PLAY MODE] to display "MONO"
To cancel
Press and hold [PLAY MODE] again until "MONO" disappear.
• MONO is also canceled if the frequency is changed.
• Turn off "MONO" for normal listening.
Numeric
buttons

Memory preset

Memory preset
Up to 15 stations each can be set in the FM and AM bands.
Preparation
Press [TUNER/BAND] to select "FM" or "AM".
Automatic presetting Automatic presetting
Press and hold [PROGRAM] to start presetting.
Manual presetting Manual presetting
1 Press [PLAY MODE] to select "MANUAL".
Press [ /REW/4] or [ /FF/¢] to tune to the
2
required station.
3 Press [PROGRAM].
Press numeric buttons to select a channel.
4
• The station occupying a channel is erased if another
Repeat steps 2 to 4 to preset more stations.
5
Selecting a preset station Selecting a preset station
Press numeric buttons to select the channel.
• For channels 10 to 15 press [h10], then the two digits.
OR
1 Press [PLAY MODE] to select "PRESET".
Press [ /REW/4] or [ /FF/¢] to select the
2
channel.

FM allocation setting

FM allocation setting
• This system can also receive FM broadcasts allocated in
0.1 MHz steps.
To change the step to 0.1 MHz
1 Press [TUNER/BAND] to select "AM".
2 Press and hold [TUNER/BAND].
• After a few seconds the display changes to a flashing
Continue to hold down [TUNER/BAND].
3
• When the minimum frequency changes, release the
• After changing the setting, previously preset frequency
station is preset in that channel.
display of the current minimum frequency.
button. To return to the original step, repeat the above
steps.
will be cleared.
11
RQT7968