Mounted Configuration - Symbol LS 7708 Quick Reference Manual

4. Tilt the plastic tab into the slot on the scanner, and rotate the opposite
edge downward. As the bracket rotates, push it toward the slot so that
the feet of the bracket lie flat against the scanner's bottom (see arrows).
5. When the bracket is flat against the scanner bottom, release pressure
so that the feet slide forward into the front of the scanner.

Mounted Configuration

Use this method if the scanner will be secured to a mounting surface.
1. Determine where the LS 7708 is going to be mounted.
2. Use a pencil to mark the four mounting holes. (A mounting template is
provided in the LS 7708 Product Reference Guide.)
7