Table of Contents
Advertisement
Problem
The shaver is not
entirely clean
after I clean it
in the Jet Clean
System.
Possible cause
The temperature of the
shaver is too high. In this
case, the shaver does
not work.
The cleaning fluid in
the cleaning chamber is
soiled.
The cleaning fluid level
is too low. If the fluid
volume in the cleaning
chamber drops below
the minimum level
during the cleaning
program, the program
aborts.The cleaning
light and the 'cleaning
chamber empty' symbol
flash at intervals and
the holder returns to its
starting position.
You have used another
cleaning fluid than the
original Philips cleaning
fluid.
English
Solution
Let the shaver cool
down. As soon as the
temperature of the
shaver has dropped
sufficiently, you can
switch on the shaver
again.
Empty and rinse the
cleaning chamber.
Refill the cleaning
chamber with cleaning
fluid to a level between
the two lines (see
chapter 'Cleaning and
maintenance').
Only use HQ200
Philips Cleaning Fluid.
Advertisement
Table of Contents
