Quick Charge - Philips rq1160cc Instruction Manual

English
3 sec 3 sec
1 Press the on/off button for 3 seconds to enter
the travel lock mode.
The lock symbol lights up on the display.
,
-tekening-
Note: The displays of types RQ1180, RQ1160 and
RQ1150 look different, but show the same symbol.
Deactivating the travel lock
1 Press the on/off button for 3 seconds.
The motor starts running to indicate that the
,
travel lock has been deactivated.
The shaver is now ready for use again.
Note: When you place the shaver in the plugged-
in charger or Jet Clean System, the travel lock is
automatically deactivated.
Charging
Charging takes approx. 1 hour.
RQ1180/RQ1160: A fully charged shaver has a
shaving time of up to 50 minutes/15 days.
RQ1150: A fully charged shaver has a shaving time of
up to 40 minutes/12 days.
Charge the shaver before you use it for the first
time and when the display indicates that the battery
is almost empty (see section 'Battery low' in chapter
'The display').

Quick charge

After the shaver has charged for 5 minutes,
it contains enough energy for one shave.