Update Gpib-Enet Firmware - National Instruments NI-488.2 User Manual
National instruments user manual ni-488.2
Hide thumbs
Also See for NI-488.2:
- User manual (134 pages) ,
- Installation manual (13 pages) ,
- Getting started (7 pages)
Table of Contents
Advertisement
Chapter 2
Measurement & Automation Explorer
Update GPIB-ENET Firmware
NI-488.2 User Manual for Windows
3.
Expand the Devices and Interfaces directory by clicking on the + next
to the folder.
4.
Right-click on your GPIB-ENET interface and select Advanced IP
Settings from the drop-down menu that appears.
To view the built-in, context-sensitive help for the Advanced IP Settings
utility, click on the Help button.
You can run the Update Firmware utility in Measurement & Automation
Explorer, as follows:
1.
Select Start»Programs»National Instruments NI-488.2»Explore
GPIB to start Measurement & Automation Explorer.
2.
Expand the Devices and Interfaces directory by clicking on the + next
to the folder.
3.
Right-click on your GPIB-ENET interface and select Update
Firmware from the drop-down menu that appears.
To view the built-in, context-sensitive help for the Update Firmware utility,
click on the Help button.
2-16
www.natinst.com
Advertisement
Table of Contents
