Starting Measurement & Automation Explorer; Getting Started With Ni-488.2; Figure 2-1. Measurement & Automation Explorer - National Instruments NI-488.2 User Manual
National instruments user manual ni-488.2
Hide thumbs
Also See for NI-488.2:
- User manual (134 pages) ,
- Installation manual (13 pages) ,
- Getting started (7 pages)
Table of Contents
Advertisement
Chapter 2
Measurement & Automation Explorer
Starting Measurement & Automation Explorer
Getting Started with NI-488.2
NI-488.2 User Manual for Windows
To start Measurement & Automation Explorer, select
Start»Programs»National Instruments NI-488.2»Explore GPIB.
Figure 2-1 shows Measurement & Automation Explorer.
Figure 2-1. Measurement & Automation Explorer
To get started with GPIB instrument communication using Measurement &
Automation Explorer, complete the following steps:
1.
Refer to your Getting Started card and install the NI-488.2 software
and your GPIB hardware.
If you do not have a Getting Started card, complete the following steps
to view your getting started documentation:
a.
Insert the NI-488.2 for Windows CD.
2-2
www.natinst.com
Advertisement
Table of Contents
