Sony MFM-HT205 Owner's Record page 37

For TV/COMPONENT/VIDEO 1/VIDEO 2
Symptom
No picture.
Cannot receive any channels.
No sound./Noisy sound.
Good picture, no sound.
Black bars appear besides, top
and bottom of the screen.
Remote control does not operate.
Noisy picture when viewing a TV
channel.
If any problem persists, call your authorised Sony dealer and give
the following information:
• Model name: MFM-HT205
• Serial number
• Detailed description of the problem
• Date of purchase
• Name and specifications of your computer and graphics board
• Type of input signals (PC 1/PC 2/TV/COMPONENT/
VIDEO 1/VIDEO 2)
Check these items
• Make sure the mains lead is connected securely.
• Turn on the power of the display.
• Check aerial cable connections.
• Check audio cable connections.
• Check the volume control.
• Press the or 2 + button so that "Muting" disappears from the screen (pages 17, 31).
• Disconnect your headphones.
• It is depending on the type of the video source. Adjust the screen size using the "Zoom"
menu (page 25).
• The batteries could be weak. Replace the batteries.
• Check the polarity of the batteries.
• If the 1 (power) indicator on the display does not light, press the 1 (power) switch on the
display.
• If you intend to operate the TV functions, check the TV input is selected.
• If you intend to operate the TV functions with the "PIP" or "PAP" function, check the TV
input is selected for sub picture.
• When displaying a program with teletexts on the sub-picture area, you cannot switch the
PIP or PAP function using the PIP/PAP button on the remote control. The PIP/PAP button
is available only for the TeleText service (page 28).
• Set the "NR" menu to "On" to reduce the noise on the picture (page 22).
• Decrease the setting value for the "Sharpness" menu (page 21).
37
GB