Adjusting The Picture's Sharpness Manually (Phase/Pitch) (For Pc 2 Only); Adjusting The Picture's Position Manually (H Center /V Center) (For Pc 2 Only) - Sony MFM-HT75W Operating Instructions Manual

x Adjusting the picture's sharpness manually
(Phase/Pitch) (for PC 2 only)
You can adjust the picture's sharpness as follows.
1 Set the resolution to 1280 × 768 (MFM-HT75W), or
1280 × 1024 (MFM-HT95) on the computer.
2 Load the CD-ROM.
3 Start the CD-ROM, select the area and model, and
display the test pattern.
For Windows
Click [Utility] t [Windows]/[Win Utility.exe].
For Macintosh
Click [Utility] t [Mac]/[Mac Utility].
4 Press the MENU button.
The main menu appears on the screen.
5 Press the M/m buttons to select
press the OK button.
The "Screen" menu appears on the screen.
6 Press the M/m buttons to select "Phase" and press
the OK button.
The "Phase" adjustment menu appears on the screen.
7 Press the M/m buttons until the horizontal stripes
are at a minimum.
Adjust so that the horizontal stripes are at a minimum.
8 Press the OK button.
The main menu appears on the screen.
If vertical stripes are observed over the entire screen, adjust
the pitch using the following procedures.
9 Press the M/m buttons to select "Pitch" and press
the OK button.
The "Pitch" adjustment menu appears on the screen.
10 Press the M/m buttons until the vertical stripes
disappear.
Adjust so that the vertical stripes disappear.
11 Click [END] on the screen to turn off the test pattern.
24
x Adjusting the picture's position manually
If the picture is not in the center of the screen, adjust the picture's
centering as follows.
1 Set the resolution to 1280 × 768 (MFM-HT75W), or
2 Load the CD-ROM.
3 Start the CD-ROM, select the area and model, and
4 Press the MENU button.
(Screen) and
5 Press the M/m buttons to select
6 Press the M/m buttons to select "H Center" or "V
7 Press the M/m buttons to center the test pattern on
8 Click [END] on the screen to turn off the test pattern.
(H Center /V Center) (for PC 2 only)
1280 × 1024 (MFM-HT95) on the computer.
display the test pattern.
For Windows
Click [Utility] t [Windows]/[Win Utility.exe].
For Macintosh
Click [Utility] t [Mac]/[Mac Utility].
The main menu appears on the screen.
press the OK button.
The "Screen" menu appears on the screen.
Center" and press the OK button.
The "H Center" adjustment menu or "V Center" adjustment
menu appears on the screen.
the screen.
(Screen) and