Specifications; Replacement Parts; Adjusting The Headset - Shure SRH145 Manual

SRH145 Portable Headphones
SRH145 Portable Headphones provide deep, rich bass with a full range of sound in a
comfortable, lightweight design. The closed-back construction provides good external
noise isolation, while the collapsible design and adjustable, padded ear cups ensure long-
lasting comfort and ergonomic fit for on-the-go-use.
Model Variations
"m+" models include an inline three-button remote and microphone for send/end
functionality, volume, and playback control.

Adjusting the Headset

Adjust the headband for a comfortable fit.
Using the Remote (m+ models only)
Use the remote to control compatible media phone players.
Play music Click the center button once
Pause music Click the center button once.
Change volume Click the volume up (+) or volume
down (-) button to increase or
decrease the volume.
Go to next track Double-click the center button.
Go to previous track Triple-click the center button.
Restart current track Triple-click after 6 seconds.
Fast-forward Double-click and hold the center
button.
Send/End Call Click the center button once.
For more information about compatible models go to: www.shure.com
"Made for iPod," "Made for iPhone," and "Made for iPad" mean that an electronic
accessory has been designed to connect specifically to iPod, iPhone, or iPad, respectively,
and has been certified by the developer to meet Apple performance standards. Apple is
not responsible for the operation of this device or its compliance with safety and regulatory
standards. Please note that the use of this accessory with iPod, iPhone, or iPad may affect
wireless performance.
iPad, iPhone, iPod, iPod classic, iPod nano, iPod touch, and Retina are trademarks
of Apple Inc., registered in the U.S. and other countries. iPad Air and iPad mini are
trademarks of Apple Inc. The trademark "iPhone" is used with a license from Aiphone K.K.
4

Replacement Parts

HPAEC145
1 Pair of Replacement Ear Cushions
Certifications
This product meets the Essential Requirements of all relevant European directives and is
eligible for CE marking.
The CE Declaration of Conformity can be obtained from: www.shure.com/europe/
compliance
Authorized European representative:
Shure Europe GmbH
Headquarters Europe, Middle East & Africa
Department: EMEA Approval
Jakob-Dieffenbacher-Str. 12
75031 Eppingen, Germany
Phone: 49-7262-92 49 0
Fax: 49-7262-92 49 11 4
Email: EMEAsupport@shure.de

Specifications

Transducer Type
Dynamic, Neodymium magnet
Driver Size
36 mm
Frequency Response
25 to 18,000 Hz
Sensitivity
@ 1 kHz
100 dB/mW
Impedance
@ 1 kHz
34 Ω
Maximum Input Power
@ 1 kHz
200 mW
Weight
Net
150 g
Connector
3.5 mm (1/8")
Cable
1.5 m