Figure 2-1. How To Set Up Your Imaq System - National Instruments IMAQ PCI-1411 User Manual

LabWindows/CVI
Third-Party Compilers
Read Chapter 1, Introduction
to NI-IMAQ , in the
NI-IMAQ User Manual .
Read the sections in
chapters 2 and 3 in the NI-IMAQ
User Manual that apply to the
function groups you
will use in your application.
Look at the self-documented
example source code on your
distribution CD for your
application language
and environment.
Use the NI-IMAQ Function
Reference Manual when you
need specific information about
individual NI-IMAQ functions.
If you are using IMAQ Vision for
LabWindows/CVI, read the
documentation for IMAQ Vision
for LabWindows/CVI.
© National Instruments Corporation
Read the Getting Started with Your IMAQ System
document and the NI-IMAQ release notes to install
your NI-IMAQ software, IMAQ hardware,
and documentation.
Configure your hardware using the
Measurement & Automation Explorer and
online help.
What
application software
are you using?
Read Getting Results with
ComponentWorks IMAQ Vision
for information on using
ComponentWorks in your
application environment.
Use the ComponentWorks
IMAQ Vision documentation
when you need specific
information about individual
NI-IMAQ functions.

Figure 2-1. How to Set up Your IMAQ System

2-3
LabVIEW
BridgeVIEW
ComponentWorks
Read:
• NI-IMAQ VI Reference
Manual
• Your IMAQ Vision for G
documentation if you are
using IMAQ Vision for G
You no longer need the online
NI-IMAQ documentation.
Chapter 2 Installation
IMAQ PCI/PXI-1411 User Manual