Installation
What You Need to Get Started
© National Instruments Corporation
This chapter lists what you need to get started acquiring images with
your IMAQ device; describes optional equipment and custom cables;
and explains how to unpack, configure, and install your IMAQ device.
To set up and use your PCI/PXI-1411, you will need the following:
One of the following IMAQ devices:
–
PCI-1411
–
PXI-1411
Getting Started with Your IMAQ System
IMAQ PCI/PXI-1411 User Manual
NI-IMAQ release notes
NI-IMAQ for Windows 2000/NT/9x and documentation
Optional software packages and documentation:
–
IMAQ Vision for G, LabWindows/CVI, or ComponentWorks
–
LabVIEW
–
BridgeVIEW
–
LabWindows/CVI
–
IMAQ Vision Builder
BNC cable (included with your PCI/PXI-1411)
S-Video cable (optional)
Your Pentium-based PCI computer, PXI chassis, or CompactPCI
chassis running Windows 2000, Windows NT, or Windows 9x
An analog video camera (composite or S-Video)
2-1
2
IMAQ PCI/PXI-1411 User Manual