Chapter 2
Installation
Optional Equipment
How to Set up Your IMAQ System
IMAQ PCI/PXI-1411 User Manual
National Instruments offers a variety of products for use with your
PCI/PXI-1411, including other National Instruments DAQ devices
for enhanced triggering, timing, or input/output.
For more specific information about these products, refer to your
National Instruments catalogue or Web site, or call the office nearest you.
Use Figure 2-1 as a guide while you install your software and hardware,
configure your hardware, and begin using NI-IMAQ in your application
programs.
Follow the instructions in the Getting Started with Your IMAQ System
document to install your NI-IMAQ software and IMAQ hardware.
If you will be accessing the NI-IMAQ device drivers through LabVIEW
or BridgeVIEW, you should read the NI-IMAQ release notes and the
NI-IMAQ VI Reference Manual to help you get started.
2-2
www.ni.com