Saving The Configuration - Canon WFT-E6 Operational Manual

Saving the Configuration

mode (Camera Access Point connection)
mode (Infrastructure connection)
1
Review the access point's configuration
and then press SET.
Push the joystick up/down or turn the SELECT dial
to review additional settings before pressing SET.
2
Save the current configuration.
Select [OK] and then press SET twice. When the
confirmation message appears, press SET.
Any previous settings will be overwritten by the
new settings you saved.
2
To change the [Network Configuration
Name], select [Input] and then press
SET.
If you wish, you can give the network configuration
profile a more descriptive name to make it easier
to identify. Enter the desired name using the
keyboard screen (A 10).
3
Save the network configuration.
Select [OK] and then press SET. When the
confirmation message appears, press SET.
Any previous settings will be overwritten by the
new settings you saved.
17