Canon WFT-E6 Operational Manual page 13

Wireless Routers without a WPS Button
The [WPS: Button] method may not work correctly if there are several active access points in the area.
In such case try using [WPS: PIN Code] or [Search for Access Points] instead.
1
The camera will generate and display an
8-digit PIN code. Enter it into the
wireless router's WPS (PIN code) setup
*
screen.
*
For most wireless routers, you must use a Web browser to
access the setup screen.
For details about how to access your wireless
router's settings and activate the Wi-Fi Protected
Setup (WPS) using a PIN code, refer to the
instruction manual of your wireless router.
2
Within 2 minutes, press SET on the
camera.
While [Connecting] appears on the screen, you
can press SET or the CANCEL button to cancel
the operation.
After the connection is correctly established,
continue with the procedure to configure the IP
address assignment (A 16).
Wi-Fi Protected Setup (WPS)
13