Setting Up Of Stabilizer Paddles; Setting Up Of Blade Pitch Angle - THUNDER TIGER Raptor 90 3D Assembly And Maintenance Manual

6-2

Setting up of Stabilizer Paddles

A // B // C
C
B
A
Always make sure the flybar paddles, swashplate, and top of metal frame are parallel.
6-3

Setting up of Blade Pitch Angle

On the left side frame, there are three pitch scales
molded onto the Pitch Guide. The three different
scales are designed for beginner, F3C and 3D
pilots.
Use the "Pointer" on the collective tray and the
plastic molded scales to set up the initial collective
control.
The actual blade angle in degrees can be checked
by a pitch gauge (sold separately).
Note:Recommended rotorspeed is 1450~1550 rpm for hover and 1800~1900 rpm for idle-up aerobatics.
POINTER
43
-11˚
-9˚
0˚
11˚
13˚
The optional Pitch Gauge (#3802)
-11˚
-9˚ is recommended as shown.
0˚
11˚
13˚