Table 3-2. Scsi Cables - HP N1528A Installation And User Manual

Installing and Configuring the ACL Tape Drive for the
NonStop S-Series Server
•
ServerNet/DA
•
IOMF2 CRU
•
PMF CRU
You can use any of the following SCSI cables:

Table 3-2. SCSI Cables

Model Number
519-003W
519-015W
519-020W
519-023W
6. Connect one end of the VHDCI 68-pin to VHDCI 68-pin SCSI cable to the top port
below the rear of the internal tape drive. See
7. Connect the other end to the bottom SCSI port on the SCSI Converter card. See
Figure 3-5.
8. Install one of the LVD terminators on the top SCSI port of the Library Controller
card. See Figure
9. Install the other LVD terminator on the bottom SCSI port below the rear of the
internal tape drive. See
N1528A and N1529A ACL Tape Drive Installation and User's Guide—544594-003
Description
3 meter copper SCSI cable
15 meter copper SCSI cable
20 meter copper SCSI cable
23 meter copper SCSI cable
3-5.
Figure 3-4.
3 -6
Installation Procedure for Old Model
Figure 3-5.