Installation Materials - Garmin GMA 347 Installation Manual

2.4

Installation Materials

2.4.1 Configurations Available
The GMA 347 is available in three versions under the following part numbers. Catalog part numbers are
shown with and without the installation kit.
Model Front Panel
GMA 347
GMA 347
GMA 347
GMA 347
GMA 347H
GMA 347H
2.4.2 Equipment Available
Each of the following accessories is provided separately or in kit form for the GMA 347. The installation
kit includes the unit and the following hardware:
Sub Assy, Connector Kit, GMA 347
SMP, Install Rack, GMA 347
Sub Assy, Backplate, GMA 347
Configuration Module Kit
Garmin Marker Beacon Antenna Kit**
** Note: A marker beacon antenna approved to TSO C35d that has been installed to meet the
requirements of this manual may be approved for use with the GMA 347.
2.4.3 Additional Equipment Required
•
Antenna sealant (use manufacturer's instructions, install according to FAA Advisory Circular
AC 43.13-2A).
•
Cables: The installer will fabricate and supply all system cables.
diagrams are detailed in Appendix C.
•
Hardware #6-32 x 100° Flat Head SS Screw [(MS24693, AN507R or other approved
fastener) (6 ea.)] and #6-32 Self-Locking Nut [MS21042 or other approved fastener (6 ea.)].
Hardware required to mount the installation rack is not provided.
•
Stereo headphone jacks (up to 6), microphone jacks (up to 6), 3.5 mm stereo jacks (up to 2),
and insulating washers for all.
Page 2-2
Revision A
Unit P/N
Color
Black 011-00807-00
Black 011-00807-00
Gray 011-00807-10
Gray 011-00807-10
Black 011-00807-20
Black 011-00807-20
Item
Installation
Catalog P/N
010-00275-00
010-00275-01
010-00275-10
010-00275-11
010-00275-20
010-00275-21
Garmin P/N
011-00813-01
115-00427-00
011-00812-00
011-00979-00
010-10175-00
Interconnect wiring
GMA 347 Installation Manual
Kit
No
Yes
No
Yes
No
Yes
190-00325-01