Photo Standby; Taking Photos - Kompernass CR 5 A1 Operating Instructions Manual

Photo standby

GB
IE

Taking photos

16
With the menu closed, press the MODE button
photo standby. The device then displays the following overview on the screen
A – displays the remaining number of photos that can still be taken depending
on resolution and available storage space
B – current photo resolution
C – symbol to indicate an inserted microSD card
D – battery charge level of the internal battery
E – date display (only when the "Time & date stamp" is activated)
E – time display (only when the "Time & date stamp" is activated)
G – symbol for self-timer (here 5 seconds: only visible if the function is activated)
H – symbol for exposure correction
I – display for photo standby
J – display for continuous advance function (only visible if feature is enabled)
Press the ▲ button repeatedly as required to zoom into the subject. Hold down
the button for fast zoom. You can use the ▼ button
out. Press the / button
If you now press the MENU button
Using the ▲▼ buttons
and then call up this menu item with the
menu item without making a change, press the MODE button
current menu board as well as the total number of menu boards is shown. If the
lowest menu item on a menu board is selected which leads to a further menu
board, press the ▼ button
To close the menu, press the MENU button
to take a photo.
in photo standby, the following menu opens:
/ you can move the selection bar to the desired entry
/
to jump to the fi rst entry on the following menu board.
.
during video standby to switch to
in the same way to zoom
button . To exit the activated
. Below right, the
:
CR 5 A1