7
Maintenance / troubleshooting
Adding or removing radio devices
7.4 Adding or removing radio devices
7.4.1
38
Building Technologies
Fire Safety
The procedure for adding or removing radio devices on a detector line is no
different to the one used for adding or removing wired devices. The relevant fire
detection system documents also apply to the SWING radio fire detection system.
You will find more information in the 'Change and extend the detector line' chapters
of the following documents:
For control panels FC20xx: Document 009052
For control panels FC72x: Document A6V10210416
See also
Connecting the radio gateway [
Applicable documents [
Adding radio devices
The procedure for adding radio devices on a detector line is no different to the one
used for adding wired devices. The relevant fire detection system documents also
apply to the SWING radio fire detection system.
Wait until one radio device has been successfully logged on before attempting to
add the next radio device. The internal alarm indicator for the radio device is off.
Radio gateway FDCW221
27]
7]
H2
S1
S2
A6V10227639_e_en_--
H3
H4
2013-09-01