Clevo N240JU Service Manual
  1. Manuals
  2. Brands
  3. Clevo Manuals
  4. Laptop
  5. N240JU
  6. Service manual

Clevo N240JU Service Manual

Notebook computer
Hide thumbs
Table of Contents

Advertisement

Quick Links

N240JU / N241JU

Advertisement

Table of Contents
loading

Related Manuals for Clevo N240JU

Summary of Contents for Clevo N240JU

  • Page 1 N240JU / N241JU...
  • Page 3 Preface Notebook Computer N240JU / N241JU Service Manual...
  • Page 4 Preface Notice The company reserves the right to revise this publication or to change its contents without notice. Information contained herein is for reference only and does not constitute a commitment on the part of the manufacturer or any subsequent ven- dor.
  • Page 5 This manual is intended for service personnel who have completed sufficient training to undertake the maintenance and inspection of personal computers. It is organized to allow you to look up basic information for servicing and/or upgrading components of the N240JU / N241JU series notebook PC.
  • Page 6 Preface IMPORTANT SAFETY INSTRUCTIONS Follow basic safety precautions, including those listed below, to reduce the risk of fire, electric shock and injury to per- sons when using any electrical equipment: 1. Do not use this product near water, for example near a bath tub, wash bowl, kitchen sink or laundry tub, in a wet basement or near a swimming pool.

  • Page 7: Instructions For Care And Operation

    Preface Instructions for Care and Operation The notebook computer is quite rugged, but it can be damaged. To prevent this, follow these suggestions: Don’t drop it, or expose it to shock. If the computer falls, the case and the components could be damaged. Do not expose the computer Do not place it on an unstable Do not place anything heavy...

  • Page 8: Power Safety

    Preface Avoid interference. Keep the computer away from high capacity transformers, electric motors, and other strong mag- netic fields. These can hinder proper performance and damage your data. Take care when using peripheral devices. Use only approved brands of Unplug the power cord before peripherals.

  • Page 9: Battery Precautions

    Preface Battery Precautions • Only use batteries designed for this computer. The wrong battery type may explode, leak or damage the computer. • Do not continue to use a battery that has been dropped, or that appears damaged (e.g. bent or twisted) in any way. Even if the computer continues to work with a damaged battery in place, it may cause circuit damage, which may possibly result in fire.

  • Page 10: System Startup

    Preface Related Documents You may also need to consult the following manual for additional information: User’s Manual on CD/DVD This describes the notebook PC’s features and the procedures for operating the computer and its ROM-based setup pro- gram. It also describes the installation and operation of the utility programs provided with the notebook PC. System Startup 1.

  • Page 11: Table Of Contents

    Preface Contents Introduction ..........1-1 Top (TV Tuner) ................A-4 Bottom ................... A-5 Overview ..................1-1 LCD ....................A-6 Specifications ..................1-2 HDD ....................A-7 External Locator - Top View with LCD Panel Open ......1-4 Schematic Diagrams......... B-1 External Locator - Front & Right Side Views .........1-5 External Locator - Left Side &...
  • Page 12 Preface VDD3, VDD5 ................B-27 VDDQ_VTT, 1.5VS, 1.8VS ............B-28 1.0V Series ................... B-29 VCore, VCCGT, VCCSA, VCCIO ..........B-30 NCP81206 Regulator ..............B-31 Charger, DC-In ................B-32 USB Board ................... B-33 CRT ....................B-34 RTL8411B ..................B-35 Power SW Board ................B-36 Click Board ..................

  • Page 13: Introduction

    Chapter 1: Introduction Overview This manual covers the information you need to service or upgrade the N240JU / N241JU series notebook computer. Information about operating the computer (e.g. getting started, and the Setup utility) is in the User’s Manual. Information about dri-vers (e.g.

  • Page 14: Specifications

    Introduction Specifications Processor Options Video Adapter Intel® Core™ i7 Processor Intel GPU (CPU integrated) i7-6500U (2.50GHz) Intel HD Graphics 520 (Core i7/i5/i3 CPU) 4MB Smart Cache, 14nm, DDR3L-1600MHz, TDP 15W  Dynamic Frequency Intel® Core™ i5 Processor Intel Dynamic Video Memory Technology Latest Specification Information i5-6200U (2.30GHz) Microsoft DirectX®12 Compatible...
  • Page 15 Introduction Card Reader Communication Dimensions & Weight Embedded Multi-In-1 Card Reader Built-In Gigabit Ethernet LAN 340mm (w) * 243.5mm (d) * 22.2mm (h) (Height Excluding Battery Area) MMC (MultiMedia Card) / RS MMC 1.0M HD PC Camera Module (Factory Option) 3G or 4G M.2 Module 1.8kg (Barebone with 32WH Battery) SD (Secure Digital) / Mini SD / SDHC/ SDXC WLAN/ Bluetooth M.2 Modules:...

  • Page 16: External Locator - Top View With Lcd Panel Open

    Introduction External Locator - Top View with LCD Panel Open Figure 1 Top View 1. PC Camera 2. *PC Camera LED *When the PC camera is in use, the LED will be illuminated in red. 3. Built-In Microphone 4. LCD 5.

  • Page 17: External Locator - Front & Right Side Views

    Introduction External Locator - Front & Right Side Views Figure 2 Front View 1. LED Indicator FRONT VIEW Figure 3 Right Side View 1. USB 2.0 Port RIGHT SIDE VIEW 2. Multi-in-1 Card Reader 3. External Monitor Port 4. RJ-45 LAN Jack External Locator - Front &...

  • Page 18: External Locator - Left Side & Rear View

    Introduction External Locator - Left Side & Rear View Figure 4 Left Side View 1. Security Lock Slot 2. DC-In Jack 3. HDMI-Out Port LEFT SIDE VIEW 4. Vent 5. USB 3.0 Ports 6. Microphone-In Jack 7. Headphone-Out Jack Figure 5 REAR VIEW Rear View 1.

  • Page 19: External Locator - Bottom View

    Introduction External Locator - Bottom View Figure 6 Bottom View 1. Battery 2. Vent 3. Speakers  Overheating To prevent your com- puter from overhea- ting, make sure no- thing blocks any vent while the computer is in use. External Locator - Bottom View 1 - 7...

  • Page 20: Mainboard Overview - Top (Key Parts)

    Introduction Mainboard Overview - Top (Key Parts) Figure 7 Mainboard Top Key Parts 1 - 8 Mainboard Overview - Top (Key Parts)

  • Page 21: Mainboard Overview - Bottom (Key Parts)

    Introduction Mainboard Overview - Bottom (Key Parts) Figure 8 Mainboard Bottom Key Parts 1. KBC-ITE IT8587 2. CPU 3. Memory Slots DDR3L SO-DIMM 4. CMOS Battery Mainboard Overview - Bottom (Key Parts) 1 - 9...

  • Page 22: Mainboard Overview - Top (Connectors)

    Introduction Mainboard Overview - Top (Connectors) Figure 9 Mainboard Top Connectors 1. DC-In Jack 2. HDMI-Out Port 3. USB Ports 3.0 4. Microphone-In Jack 5. Headphone-Out Jack 6. SIM Card Reader 7. Keyboard Cable Connector 1 - 10 Mainboard Overview - Top (Connectors)

  • Page 23: Mainboard Overview - Bottom (Connectors)

    Introduction Mainboard Overview - Bottom (Connectors) Figure 10 Mainboard Bottom Connectors 1. 3G/4G Card Connector 2. M.2 Card Connectort 3. WLAN Connector 4. HDD Connector 5. Touchpad Connector 6. Speaker Connector 7. Fan Connector 8. LCD Cable Connector 9. CCD Connector 10.
  • Page 24 Introduction 1 - 12...

  • Page 25: Disassembly

    Chapter 2: Disassembly Overview This chapter provides step-by-step instructions for disassembling the N240JU / N241JU series notebook’s parts and sub- systems. When it comes to reassembly, reverse the procedures (unless otherwise indicated). We suggest you completely review any procedure before you take the computer apart.

  • Page 26: Maintenance Tools

    Disassembly NOTE: All disassembly procedures assume that the system is turned OFF, and disconnected from any power supply (the battery is removed too). Maintenance Tools The following tools are recommended when working on the notebook PC: • M3 Philips-head screwdriver •...

  • Page 27: Maintenance Precautions

    Disassembly Maintenance Precautions  The following precautions are a reminder. To avoid personal injury or damage to the computer while performing a re- moval and/or replacement job, take the following precautions: Power Safety Warning 1. Don't drop it. Perform your repairs and/or upgrades on a stable surface. If the computer falls, the case and other Before you undertake components could be damaged.

  • Page 28: Disassembly Steps

    Disassembly Disassembly Steps The following table lists the disassembly steps, and on which page to find the related information. PLEASE PERFORM THE DISASSEMBLY STEPS IN THE ORDER INDICATED. To remove the Battery: To remove the CCD Module: 1. Remove the battery page 2 - 5 1.

  • Page 29: Removing The Battery

    Disassembly Removing the Battery Figure 1 Battery Removal 1. Turn off the computer, turn it over. 2. Slide the latch in the direction of the arrow (Figure 1a a. Slide the latch and hold it 3. Slide the latch in the direction of the arrow, and hold it in place (Figure 1b in place.

  • Page 30: Removing The Hard Disk Drive

    Disassembly Removing the Hard Disk Drive Figure 2 HDD Assembly The hard disk drive can be taken out to accommodate other 2.5" serial (SATA) hard disk drives with a height of 7.0mm Removal (h). Follow your operating system’s installation instructions, and install all necessary drivers and utilities (as outlined in Chapter 4 of the User’s Manual) when setting up a new hard disk.
  • Page 31 Disassembly 5. Slightly lift and pull the hard disk assembly in the direction of arrow (Figure 3d Figure 3 6. Lift the hard disk assembly out of the bay (Figure 3e HDD Assembly 7. Remove the screws and the adhesive cover from the hard disk (Figure 3f Removal (cont’d.)

  • Page 32: Removing The System Memory (Ram)

    Disassembly Removing the System Memory (RAM) Figure 4 RAM Module The computer has two memory sockets for 204 pin Small Outline Dual In-line Memory Modules (SO-DIMM) supporting Removal single or dual channel DDR3L depending on the CPU. The main memory can be expanded up to 8GB. The SO-DIMM modules supported are 1024MB and 2048MB DDR3L Modules.
  • Page 33 Disassembly 5. Pull the latches to release the second module if necessary. 6. Insert a new module holding it at about a 30° angle and fit the connectors firmly into the memory slot. 7. The module will only fit one way as defined by its pin alignment. Make sure the module is seated as far into the slot as it will go.

  • Page 34: Removing The Keyboard

    Disassembly Removing the Keyboard Figure 5 1. Turn off the computer, turn it over to remove the battery (page 2 - Keyboard Removal 2. Remove screws from the bottom case (Figure 5a). 3. Open it up with the LCD on a flat surface before pressing at point to release the keyboard module while releas- ing the keyboard in the direction of the arrow as shown...

  • Page 35: Removing The Wireless Lan Module

    Disassembly Removing the Wireless LAN Module Figure 6 Wireless LAN 1. Turn off the computer, turn it over to remove the battery (page 2 - Module Removal 2. The Wireless LAN module will be visible at point on the mainboard (Figure 6a).

  • Page 36: Wireless Lan, And Combo Module Cables

    Disassembly Wireless LAN, and Combo Module Cables Note that the cables for connecting to the antennae on WLAN, and WLAN & Bluetooth Combo modules are not labelled. The cables/covers (each cable will have either a black or transparent cable cover) are color coded for identification as outlined in the table below.

  • Page 37: Removing The 3G Module

    Disassembly Removing the 3G Module Figure 7 3G Module Removal Procedure 3G Module Removal 1. Turn off the computer, remove the battery (page 2 - a. Locate the module. 2. Locate the module, it is visible at point Figure 7a b.

  • Page 38: Removing And Installing The M.2 Ssd Module

    Disassembly Removing and Installing the M.2 SSD Module Figure 8 M.2 SSD Module m.2 SSD Removal Procedure Removal 1. Turn off the computer, turn it over to remove the battery (page 2 - 5) and bottom cover (page 2 - 2.
  • Page 39 Disassembly M.2 SSD Installation Procedure Figure 9 1. Place the thermal pad on the bottom case as shown (Figure 9a). M.2 SSD Module 2. Insert the module in the computer Figure 9b Installation 3. Tighten the screw to secure it in place (Figure 9c).

  • Page 40: Removing The Ccd

    Disassembly Removing the CCD Figure 10 CCD Removal 1. Turn off the computer, turn it over to remove the battery (page 2 - 5) and then separate the LCD Panel from the bottom case. a. Remove the rubber cov- 2. Remove the rubber covers and screws (Figure 10a).
  • Page 41 Disassembly 6. Remove the LCD front cover (Figure 11e). Figure 11 7. Disconnect the cable (Figure 11f). CCD Removal 8. Remove the CCD module (Figure 11g). (cont’d.) 9. Reverse the process to install a new CCD module. e. Remove the LCD front cover.
  • Page 42 Disassembly 2 - 18...

  • Page 43: Part Lists

    Appendix A:Part Lists This appendix breaks down the N240JU / N241JU series notebook’s construction into a series of illustrations. The com- ponent part numbers are indicated in the tables opposite the drawings. Note: This section indicates the manufacturer’s part numbers. Your organization may use a different system, so be sure to cross-check any relevant documentation.

  • Page 44: Part List Illustration Location

    Part List Illustration Location The following table indicates where to find the appropriate part list illustration. Table A - 1 Part List Illustration Part Location page A - 3 Top (TV Tuner) page A - 4 page A - 5 Bottom page A - 6 page A - 7...

  • Page 45: Top

    Figure A - 1 Top A - 3...

  • Page 46: Top (Tv Tuner)

    Top (TV Tuner) Figure A - 2 Top (TV Tuner) A - 4 Top (TV Tuner)

  • Page 47: Bottom

    Bottom Figure A - 3 Bottom Bottom A - 5...

  • Page 48: Lcd

    Figure A - 4 A - 6 LCD...

  • Page 49: Hdd

    Figure A - 5 HDD A - 7...
  • Page 50 A - 8...

  • Page 51: Schematic Diagrams

    Schematic Diagrams Appendix B: Schematic Diagrams This appendix has circuit diagrams of the N240JU / N241JU notebook’s PCB’s. The following table indicates where to find the appropriate schematic diagram. Diagram - Page Diagram - Page Diagram - Page Table B - 1...

  • Page 52: Vdd3,Vdd5

    Schematic Diagrams System Block Diagram 7 IN 1 6-7P-N24J7-003 SKYLAKE U System Block Diagram 3V,5V,3VS,5VS,1.8VS MAIN BOARD SHEET 1~31 6-71-N24J0-D02A DEFAULT 14" SHEET 25 USB BOARD 6-71-N2403-D04 1066/ 1333 MHz SHEET 32 DDR3L / 3.3V DDR3L MULTI BOARD VDD3,VDD5 RTD2136 SO-DIMM A SHEET 26 CRT CONN...

  • Page 53: Processor 1/11

    Schematic Diagrams Processor 1/11 SKL_ULT U19C SKL_ULT [14] M_B_DQ[63:0] U19B [13] M_A_DQ[63:0] M_B_DQ0 AF65 AN45 AU53 DDR1_DQ[0]/DDR0_DQ[16] DDR1_CKN[0] M_B_CLK_DDR#0 [14] DDR0_CKN[0] M_A_CLK_DDR#0 [13] M_B_DQ1 AF64 AN46 M_A_DQ0 AL71 AT53 DDR1_DQ[1]/DDR0_DQ[17] DDR1_CKN[1] M_B_CLK_DDR#1 [14] M_A_CLK_DDR0 [13] M_B_DQ2 DDR0_DQ[0] DDR0_CKP[0] AK65 AP45 M_A_DQ1 AL68 AU55...

  • Page 54: Processor 2/11

    Schematic Diagrams Processor 2/11 SKL_ULT U19A [17] VGA_LANE0N EDP_TXN_0 [18] DDI1_TXN[0] EDP_TXN[0] [17] VGA_LANE0P EDP_TXP_0 [18] DDI1_TXP[0] EDP_TXP[0] [17] VGA_LANE1N DDI1_TXN[1] EDP_TXN[1] EDP_TXN_1 [18] [17] VGA_LANE1P EDP_TXP_1 [18] DDI1_TXP[1] EDP_TXP[1] DDI1_TXN[2] EDP_TXN[2] DDI1_TXP[2] EDP_TXP[2] DDI1_TXN[3] EDP_TXN[3] DDI1_TXP[3] EDP_TXP[3] [15] HDMI_DATA0N DDI2_TXN[0] EDP_AUXN EDP_AUXN...

  • Page 55: Processor 3/11

    Schematic Diagrams Processor 3/11 SKL_ULT U19H SSIC / USB3 PCIE/USB3/SATA USB3_1_RXN USB3_1RXN [20] USB3_1RXP [20] USB3_1_RXP port1(2.0+3.0) USB3_1TXN [20] [17] PCIE_RXN1_LAN PCIE1_RXN/USB3_5_RXN USB3_1_TXN [17] PCIE_RXP1_LAN USB3_1TXP [20] LAN/CARD READER PCIE1_RXP/USB3_5_RXP USB3_1_TXP [17] PCIE_TXN1_LAN PCIE1_TXN/USB3_5_TXN [17] PCIE_TXP1_LAN PCIE1_TXP/USB3_5_TXP USB3_2_RXN/SSIC_1_RXN USB3_2RXN [21] USB3_2RXP [21] USB3_2_RXP/SSIC_1_RXP...

  • Page 56: Processor 4/11

    Schematic Diagrams Processor 4/11 U19J SKL_ULT D02A XTAL CLOCK SIGNALS C366 CLKOUT_PCIE_N0 CLKOUT_PCIE_P0 18p_50V_NPO_04 10K_04 PCIECLKRQ0# AR10 3.3VA GPP_B5/SRCCLKREQ0# D02A CLKOUT_ITPXDP_N R329 CLKOUT_PCIE_N1 CLKOUT_ITPXDP_N CLKOUT_PCIE_P1 CLKOUT_ITPXDP_P 10K_04 PCIECLKRQ1# CLKOUT_ITPXDP_P 1M_%_04 FSX3M_24MHZ 3.3VS GPP_B6/SRCCLKREQ1# *1K_04 R464 6-22-24R00-1B9 BA17 SUSCLK GPD8/SUSCLK SUSCLK [21] 6-22-24R00-1BA [21]...

  • Page 57: Processor 5/11

    Schematic Diagrams Processor 5/11 SKL_ULT STRAP PIN U19G Flash Descriptor Security Overide AUDIO Low = Enable security measures defined in the Flash Descriptor. (Default) R467 33_04 HDA_SYC BA22 High = Disable Flash Descriptor Security (override) [23] HDA_SYNC HDA_SYNC/I2S0_SFRM 3.3VS R468 33_04 HDA_BLK AY22...

  • Page 58: Processor 6/11

    Schematic Diagrams Processor 6/11 SKL_ULT U19F LPSS EDP & LVDS Detect 3.3VA STRAP PIN 3.3VS HIGH (Default) 3.3VA PCH_GPP_B15 R393 10K_04 No Reboot GPP_B15/GSPI0_CS# T_INT PCH_GPP_B16 *1K_04 GPP_D9 EDP_DET GPP_B16/GSPI0_CLK R394 *10K_04 LVDS PCH_GPP_B17 GPP_D10 HIGH Enable “No Reboot” mode PCH_GPP_D11 SW I#_R GPP_B17/GSPI0_MISO...

  • Page 59: Processor 7/11

    Schematic Diagrams Processor 7/11 SKL_ULT &' W' d U19S W' d VCCIO_OUT RESERVED SIGNALS-1 Z^d R380 1K_04 CFG0 BB68 CFG7 R399 *1K_04 CFG[0] RSVD_TP_BB68 W' t /K^ R396 *10K_04 CFG1 BB69 CFG[1] RSVD_TP_BB69 R374 *10K_04 CFG2 CFG[2] R392 *10K_04 CFG3 AK13 CFG[3] RSVD_TP_AK13...

  • Page 60: Processor 8/11

    Schematic Diagrams Processor 8/11 PROCESSOR CORE POWER VCCIN SVID Signals VCCIN VCCIN SKL_ULT U19L 1.0VT CPU POWER 1 OF 4 R332 56_1%_04 H_CPU_SVIDALRT# C148 C142 C122 VCC_A30 VCC_G32 R333 100_1%_04 H_CPU_SVIDDAT_R VCC_A34 VCC_G33 VCC_A39 VCC_G35 CAD Note: the PU resistors close to CPU VCC_A44 VCC_G37 AK33...

  • Page 61: Processor 9/11

    Schematic Diagrams Processor 9/11 1.0VA 0.696 A *30mil_short_06 1.0VA_1P0 C133 C101 C102 1u_6.3V_X5R_04 SKL_ULT U19O CPU POWER 4 OF 4 2.574 A *30mil_short_06 1.0VA_CORE AB19 1.0VA VCCPRIM_1P0 0.020 A C100 1u_6.3V_X5R_04 AB20 AK15 3.3VA_GPP *30mil_short_06 VCCPRIM_1P0 VCCPGPPA 3.3VA 22u_6.3V_X5R_06 AG15 0.004 A VCCPRIM_1P0 VCCPGPPB...

  • Page 62: Processor 10/11

    Schematic Diagrams Processor 10/11 VCCGT SKL_ULT VCCGT U19M VCCGT 31 A C104 CPU POWER 2 OF 4 31 A VCCGT VCCGT VCCGT VCCGT VCCGT VCCGT VCCGT VCCGT VCCGT VCCGT VCCGT AA63 VCCGT VCCGT AA64 VCCGT VCCGT AA66 VCCGT VCCGT AA67 VCCGT VCCGT AA69...

  • Page 63: Processor 11/11

    Schematic Diagrams Processor 11/11 SKL_ULT SKL_ULT U19P U19Q GND 1 OF 3 GND 2 OF 3 A5_L AL65 AT63 BA49 A67_L AL66 AT68 BA53 A70_L AM13 AT71 BA57 AM21 AU10 AM25 AU15 BA62 AA65 AM27 AU20 BA66 AA68 AM43 AU32 BA71 BA71_R SKL_ULT...

  • Page 64: Ddr3 So-Dimm_0

    Schematic Diagrams DDR3 SO-DIMM_0 SO-DIMM A JDIMM1B V_VCCDDQ JDIMM1A VDD1 VSS16 M_A_A[15:0] M_A_DQ[63:0] M_A_A0 M_A_DQ2 VDD2 VSS17 M_A_A1 M_A_DQ0 VDD3 VSS18 M_A_A2 M_A_DQ1 VDD4 VSS19 3.3VS M_A_A3 M_A_DQ3 VDD5 VSS20 20mils M_A_A4 M_A_DQ5 VDD6 VSS21 M_A_A5 M_A_DQ4 VDD7 VSS22 M_A_A6 M_A_DQ6 VDD8 VSS23...

  • Page 65: Ddr3 So-Dimm_1

    Schematic Diagrams DDR3 SO-DIMM_1 JDIMM2B SO-DIMM B V_VCCDDQ VDD1 VSS16 VDD2 VSS17 VDD3 VSS18 VDD4 VSS19 3.3VS VDD5 VSS20 JDIMM2A 20mils M_B_A[15:0] M_B_DQ[63:0] VDD6 VSS21 M_B_A0 M_B_DQ11 VDD7 VSS22 M_B_A1 M_B_DQ13 VDD8 VSS23 M_B_A2 M_B_DQ10 C167 C165 VDD9 VSS24 M_B_A3 M_B_DQ9 VDD10 VSS25...

  • Page 66: Hdmi

    Schematic Diagrams HDMI HDMI CONNECTOR ( W/O LEVELSHIFT) HDMI_5VS J_HDMI1 VOUT C287 C288 [17,25,27] SUSB HDMI_HPD-C R247 20K_04 HOT PLUG DETECT uP7549UMA5-20 DDC/CEC GND HDMI_SDA-C BY PLATFROM BY PLATFROM HDMI_SCL-C RESERVED R290 470_04 *W CM2012F2S-SHORT HDMI_CEC TMDS_CLOCK#-R TMDS_CLOCK# TMDS_CLOCK#J TMDS CLOCK- CLK SHIELD TMDS_CLOCK-R TMDS_CLOCK...

  • Page 67: Panel

    Schematic Diagrams Panel PANEL CONNECTOR (For coaxial cable) PANEL POWER PLVDD *3mm 3.3VS J_LCD1 PLVDD ^,KZd PN:G5243A--6-02-05243-9C0 3.3VS C290 FOR LVDS FOR EDP VOUT EC1 1000p_50V_X7R_04 1u_6.3V_X5R_04 NEAR PIN4,5 C289 C291 R256 C299 [18] LVDS-U0N 1u_6.3V_X5R_04 1u_6.3V_X5R_04 10u_6.3V_X5R_06 100K_04 [18] LVDS-U0P up7553 >100 mil...

  • Page 68: Conn, Ccd, Fan, T/P, Tv

    Schematic Diagrams Conn, CCD, Fan, T/P, TV D02A TP Connect FOR 14" and 15"(old) CPU FAN CONN R585 *0_04 TP_VCC 3.3V R531 *0_04 R530 0_04 AX995B(SOT23-6) & APE8872 Co-Layout 3.3VS C461 C464 C465 R528 R529 *RB751S-40C2 *10u_10V_Y5V_08 1u_6.3V_X5R_04 0.1u_10V_X7R_04 R507 *0_04 FON# 10K_04...

  • Page 69: Ps8625

    Schematic Diagrams PS8625 Single link (Odd) LVDS VDDIO VDDIO DEFAULT EDP VDDIO VDDIO LVDS-L0N [16] LVDS-L0P [16] LVDS-L1N [16] C300 LVDS-L1P [16] VDDIO *HCB1005KF-121T20 *10K_04 *10K_04 *0.1u_10V_X7R_04 *0.1u_10V_X7R_04 3.3VS 6-19-31001-247 VDDIO LVDS-L2N [16] LVDS-L2P [16] PS8625_PD# RST# LVDS-LCLKN [16] C298 C334 C336 GND_PS8625...

  • Page 70: Sata, Led, Kb, G-Sensor

    Schematic Diagrams SATA, LED, KB, G-Sensor G SENSOR SATA HDD 3.3V 10u_6.3V_X5R_06 C462 0.1u_10V_X7R_04 C470 3.3V_GSENSOR 3.3V_GSENSOR R525 15" and re-driver *20mil_04 J_HDD1 0ohm SATATXP0_R C447 0.01u_16V_X7R_04 SATATXP0 [4] C459 SATATXN0_R C441 0.01u_16V_X7R_04 SATATXN0 *0.1u_10V_X7R_04 SATARXN0_R C437 0.01u_16V_X7R_04 SATARXN0 R523 R524 SATARXP0_R C436...

  • Page 71: Usb, Tpm

    Schematic Diagrams USB, TPM USB PORT Charge USB 3.0 port (CHARGER) C405 22u_6.3V_X5R_08 C406 22u_6.3V_X5R_08 80 MIL C408 *220u_6.3V_6.3*6.3*4.2 USBVCC_CH Smart CDP 6-11-22711-AB7 pin8 pin4 Function CLOSE TO CONNECTOR J_USB3_1 PUSB3F96 DCP autodetect with VBUS C411 0.1u_10V_X7R_04 USB3_1TXPC USB3_1TXPJ GND1 mouse/keyboard wake up USB3_1TXP SSTX+...

  • Page 72: Wlan/Bt, 3G/Msata

    Schematic Diagrams WLAN/BT, 3G/mSATA 3G CARD / mSATA CURRENT2A ,DON'T DROP BELOW 3.135V 3G_3.3V 80 mils R312 *0_06_2A 3G POWER J_3G1 C348 220u_6.3V_6.3*6.3*4.2 3.3VS R311 *0_06_2A CHECK EC, 1.8V LEVEL C343 0.1u_16V_Y5V_04 CONFIG_2 3.3V4 R315 *0_06_2A FOR NB Ra,Ca 3G_3.3V GND10 3.3V3 R314...

  • Page 73: Ngff_M Ssd

    Schematic Diagrams NGFF_M SSD NGFF_M (M2) SSD (PCIE 4X) SATA4_GPIO16 3.3VS SATA4_GPIO16 >120 mil H: SATA 3.3VS J_SSD1 L: PCIe R450 C157 C156 C154 GND13 10K_04 0.1u_10V_X7R_04 0.1u_10V_X7R_04 10u_6.3V_X5R_06 GND12 3.3V8 GND11 3.3V7 PCIE_SATA PEDET(NC-PCIe/GND-SATA) 3.3V6 NC18 SUSCLK(32Khz)(O) M KEY *0_04 R573 GND10...

  • Page 74: Audio Codec

    Schematic Diagrams Audio Codec AUDIO CODEC ALC269-CV2 For 1.5V HDA Link. PVDD1_2 HCB1005KF-121T20 R515 *0_04 1.8VS Layout note: 1.5V OR 3.3V BY PLATFORM GND and AUDG space is DVDD_IO For 3.3V HDA Link. DESIGN, C423 C427 60mils ~ 100mils R512 0_04 10u_6.3V_X5R_06 0.1u_16V_Y5V_04...

  • Page 75: Kbc Ite It8587

    Schematic Diagrams KBC ITE IT8587 IT8587 MODEL_ID N240JU KBC_AVDD HCB1005KF-121T20 N250JU R218 *0_04 VDD3 VDD3 [18,24] SMC_EDP_CLK CSCL [17] VDD3 R217 *0_04 [18,24] SMD_EDP_DAT CSDA [17] C279 C281 C315 C303 C304 MODEL_ID R294 10K_04 10u_6.3V_X5R_06 0.1u_16V_Y5V_04 0.1u_16V_Y5V_04 0.1u_16V_Y5V_04 0.1u_16V_Y5V_04 *0.1u_16V_Y5V_04...

  • Page 76: V, 5V, 3Vs, 5Vs, Ctl Signal

    Schematic Diagrams 3V, 5V, 3VS, 5VS, CTL Signal DD_ON# SUSB 1.0VS_PWRGD VDD3 VDD3 1.0VS VDD3 VDD3 R174 R169 100K_04 10K_04 SUSB R352 R376 R375 SUSB [15,17,27] DD_ON# DD_ON# [17,20] MTN7002ZHS3 1K_04 1K_04 100K_04 MTN7002ZHS3 C227 1.0VS_PW RGD# 1.0VS_PW RGD [6,16,20,24,25,28,29] SUSB# 1.0VS_PW RGD C216...
  • Page 77 Schematic Diagrams VDD3, VDD5 VDD3/VDD5 VREF PR76 PR74 *0_04 *20mil_04 PC47 1u_6.3V_X5R_04 PR82 PR66 130K_1%_04 130K_1%_04 EN_3V EN_5V PC50 PC43 1000p_50V_X7R_04 1000p_50V_X7R_04 VREG3 PC159 PC160 PC51 PC151 PC149 PC150 PC153 PC158 4.7u_25V_X5R_08 4.7u_25V_X5R_08 1u_6.3V_X5R_04 PR64 *10K_04 0.1u_50V_Y5V_06 4.7u_25V_X5R_08 4.7u_25V_X5R_08 *15u_25V_6.3*4.4 *EW H1EM221E12OT SYS5V LDO3...
  • Page 78 Schematic Diagrams VDDQ_VTT, 1.5VS, 1.8VS PC147 PC145 PC144 PC146 PQ36A EMB17A03V VDDQ_VTT RB0540S2 G5616 Z3709 VDDQ PC36 10u_6.3V_X5R_06 VDDQ PC38 0.1u_10V_X5R_04 VLDOIN VBST VDDQ_VTT *OPEN-2mm Z3701 Z3710 PR180 0_04 Z3718 DRVH PL10 VDDQ PJ22 V_VCCDDQ ^,KZd PC31 BCIHP0730-1R0M *OPEN-10mm PC35 PR46 Z3711 VTTGND...

  • Page 79: V Series

    Schematic Diagrams 1.0V Series 1.0V For CV test *CV-40mil PR39 100K_04 VDD3 PR148 820K_1%_06 *1mm 1.0VA_EN PC95 PC99 PC103 [20,24,25,26] DD_ON PQ37A EMB17A03V VTT_SELECT [6,16,20,24,25,28,29] VTT VR Output Voltages SUSB# PR146 PC105 1.1 V 0_06 0.1u_10V_X7R_04 high (V1.1S_VTT) 1.05 V [6,24,25] SLP_SUS# EN_PSV...
  • Page 80 Schematic Diagrams VCore, VCCGT, VCCSA, VCCIO D02A D02A PC83 PC93 PC77 s'd s'd PC112 PC109 PC110 PC58 PQ13 220u_25V_6.3*12 MDU1516 PQ19 ULTRASO-8 MDU1516 PR139 2.2_06 ULTRASO-8 [30] HG_GT2 PR150 2.2_06 SW N_GT2 [30] PR160 *20mil_04 PR141 *20mil_04 [30] HG_GT1 VCCGT CMME063T-R15MS0R907 SW N_GT1 [30]...

  • Page 81: Ncp81206 Regulator

    Schematic Diagrams NCP81206 Regulator 3.3VS PR190 100K_04 PJ29 *CV-40mil PJ30 VR_EN [6,16,24] ALL_SYS_PWRGD OPEN_4mil ^,KZd PR100 CSN_SA [29] DIFFOUT_GT 100_04 VCCGT [24] VR_ON 100k_1%_04_NTC PJ55 PR11 VSP_GT place 0_04 OPEN_4mil [11] VCCGT_SENSE PR104 750_1%_04 JL 6/10 close PR102 PR114 49.9_1%_04 to PL7 100K_1%_04 PC74...

  • Page 82: Charger, Dc-In

    Schematic Diagrams Charger, DC-In PR124 PC89 *470K_04 0.1u_50V_Y5V_06 SMART CHARGER V_BAT PC88 PC86 1500p_50V_04 PQ11 0.1u_50V_Y5V_06 EMB20P03V 20K_04 J_DC_JACK1 EML1 VJACK HCB2012KF-800T80 PR88 PR117 PD11 PC54 0.01_1%_32 BCIHP-0730 8R2M 0.01_1%_32 Z4104 PC64 PC72 GND1 PC68 PC67 PR105 GND2 D02A BAT CONN FOR DXF 470K_04 PR135 PC60...

  • Page 83: Usb Board

    Schematic Diagrams USB Board U_USBVCC_1 100 MIL UJ_USB1 U_5V VOUT U_5V 10u_10V_Y5V_08 0.1u_16V_Y5V_04 22u_6.3V_X5R_08 22u_6.3V_X5R_08 *220u_6.3V_6.3*6.3*4.2 SY6288DAAC U_GND U_GNDU_GND U_GND [32] UDD_ON# UUSBH1_USB_DP2 UUSBH1_USB_DN2 U_USBVCC_1 60 mil UUSBH1_USB_DP4 UUSBH1_USB_DN4 UDD_ON# [32] 0.1u_16V_Y5V_04 UJ_USB2_1 FP225H-016S10M D02 0514 UUSBH1_USB_DN2 UUSB_PN2R UUSB_PN2_RJ U_GND DATA_L UUSB_PP2_RJ UUSBH1_USB_DP2...

  • Page 84: Crt

    Schematic Diagrams M_5VS_CRT M_5VS MJ_CRT1 108AH15FST04A4C3 RB751S-40C2 MDAC_RED *0402_short ML12 FCM1005MF-600T01 MFRED MDAC_GREEN ML10 *0402_short ML13 FCM1005MF-600T01 MFGRN POWER MR50 MR53 MDAC_BLUE ML11 *0402_short ML14 FCM1005MF-600T01 MFBLUE 2.2K_04 2.2K_04 M_3.3VS MC51 MC52 MC53 MC54 MC55 MC56 MC61 MC62 MC63 MVGA_SDA MAVCC_33 MR47 MR48...

  • Page 85: Rtl8411B

    Schematic Diagrams RTL8411B LAN (RTL8411B) Crystal HSX321S(3.2X2.5X0.65) INTEL PLAYFORM SUPPER RTC WAKE ON Switching Regulator close to PIN48 meet realtek Freq tolerance 50ppm LAN(S5) Dedeo AD6 , MSD_CMD/MS_D2 MSD_CMD/MS_D2_R 0_04 MRSET MR38 2.49K_1%_04 MR42 0_06 MVDD10 M_GND MSD_D0/MS_D1 0_04 MSD_D0/MS_D1_R (>20mil) D01 to D02 MR34...

  • Page 86: Power Sw Board

    Schematic Diagrams Power SW Board S_VDD3 POWER SW & LED POWER SWITCH D01 to D02 100K_04 SJ_SW1 S_VDD3 *YB8251 SMGND 20mil S_3.3VS FOR 15" SMGND SMGND SM_BTN# SMGND SLID_SW# SMGND FP226H-008S10M YB8251 SLID_SW# Sheet 35 of 38 FOR 14" S_3.3VS S_3.3VS S_3.3VS Power SW Board...

  • Page 87: Click Board

    Schematic Diagrams Click Board CLICK BOARD FOR 14"(old) CTP_VCC CJ_TP2 *0.1u_16V_Y5V_04 FOR 14"(old) CTP_VCC CGND CTP_CLK CTP_DATA 0.1u_16V_Y5V_04 0_06 CGND CTPBUTTON_L CTP_CLK 0_04 CTPBUTTON_R CTP_DATA 0_04 CGND CGND CJ_TP1 85201-06051 CTPBUTTON_L 20mil 0_04 CTPBUTTON_R 5mil 0_04 20mil 0_06 20mil Sheet 36 of 38 FP226H-004S10M D02 0526 CGND...

  • Page 88: Led Board

    Schematic Diagrams LED Board LED BOARD L_LED_BAT_FULL [37] [37] L_LED_ACIN L_LED_BAT_CHG [37] [37] L_LED_PWR LRN1 220_8P4R_04 RY-SP155HYYG4-1 Sheet 37 of 38 RY-SP155HYYG4-1 LED Board LGND LGND LGND LGND POWER ON LED/ AC IN FULL LED/ BAT CHARGE L3.3VS D01 to D02 D01 to D02 L3.3VS LJ_LED1...

  • Page 89: Hdd Board

    Schematic Diagrams HDD Board H_3.3VS FOR 15" HR23 *4.7K_04 HR24 *4.7K_04 HGND HR22 *4.7K_04 HR21 *4.7K_04 D02 to D02a *0.01u_16V_X7R_04 *0.1u_16V_Y5V_04 *1u_6.3V_X5R_04 *4.7K_04 PIN6 PIN10 PIN16 HJ_HDD1 HJ_HDD2 HGND HGND HGND HSATA_TXP0_L HSATA_TXP0_R *0.01u_16V_X7R_04 HSATA_TXP0 RX1P TX1P HSATA_TXN0_L HSATA_TXN0_R *0.01u_16V_X7R_04 HSATA_TXN0 RX1N TX1N...
  • Page 90 Schematic Diagrams B - 40...

  • Page 91: Updating The Flash Rom Bios

    Download the BIOS computer model. 1. Go to www.clevo.com.tw and point to E-Services and click E-Channel. Note that BIOS versions 2. Use your user ID and password to access the appropriate download area (BIOS), and download the latest BIOS files...

  • Page 92: Use The Flash Tools To Update The Bios

    BIOS Update Use the flash tools to update the BIOS 1. Make sure you are not loading any memory management programs such as HIMEM by holding the F8 key as you see the message “EFI Shell”. You will then be prompted to give “Y” or “N” responses to the programs being loaded by EFI Shell.

This manual is also suitable for:

N241ju

Table of Contents