Vauxhall CASCADA Owner's Manual page 167

Hide thumbs Also See for CASCADA:
Table of Contents

Advertisement

Button logic to operate the systems is
as follows:
● Front-rear parking assist is
active: short press deactivates
front-rear parking assist.
● Front-rear parking assist is
active: long press activates
advanced parking assist if a
forward gear is engaged.
● Advanced parking assist is
active: short press activates
front-rear parking assist.
● Advanced parking assist is
active: long press deactivates
advanced parking assist.
● Advanced parking assist and
front-rear parking assist are
active: short press deactivates
both systems.
Activation
When reverse gear is engaged, the
front and rear parking assist is ready
to operate.
The front parking assist is also
activated automatically at a speed up
to 7 mph.
An illuminated LED in the parking
assist button r or D indicates that
the system is ready to operate.
If the vehicle exceeds a speed of
7 mph, the front parking assist is
deactivated. The front parking assist
is always reactivated when vehicle
speed drops below 7 mph.
Indication
The system warns the driver with
acoustic signals against potentially
hazardous obstacles behind and in
front of the vehicle. Depending on
which side of the vehicle is closer to
an obstacle, you will hear acoustic
warning signals on the respective
side of the vehicle. The interval
between the sounds becomes shorter
as the vehicle gets closer to that
obstacle. When the distance is less
than approx. 30 cm, the sound is
continuous.
Additionally, the distance to obstacles
is shown in the Driver Information
Centre 3 95.
Driving and operating
The distance to a front and rear
obstacle is indicated by changing
distance lines around the vehicle.
Rear obstacles are indicated
acoustically and visually at the same
time.
Front obstacles are indicated visually
first. At distances less than 80 cm an
acoustic signal also sounds.
The distance indication in the Driver
Information Centre can be inhibited
by vehicle messages with a higher
priority. After approving the message
by pressing SET/CLR on the turn
signal lever, distance indication
appears again.
165

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents