Dimensions & Cutout Dimensions; Specifications - Viking Professional & Designer 200 series Installation Manual

Dimensions & Cutout Dimensions
Note: A 2"
(5.1 cm) cut-out is
required for
water supply and
discharge lines.
6
Professional Series
26-3/8" 26-3/8"
(67.0 cm) (67.0 cm)
23-3/4" 23-1/8"
(60.3 cm)
(59.0 cm)
2-5/8" 3-3/16"
(6.7 cm)
(8.1 cm)
Cabinet Flush Panel Flush
Designer Series
26-3/8"
26-3/8"
(67.0 cm)
(67.0 cm)
23-3/4" 23-1/8"
(60.3 cm) (59.0 cm)
2-1/4"
2-7/8"
(7.3 cm)
(5.7 cm)
Cabinet Flush Panel Flush
Custom Panel (200/450 Models)
23-3/4" 23-1/8"
(60.3 cm) (59.0 cm)
Cabinet Flush Panel Flush

Specifications

Built-In Dishwasher
Description
Overall width
Overall height from floor
Overall depth from rear–Professional To edge of side - 24" (61.0 cm) - includes door panel
With door open - 49" (124.5 cm)
Overall depth from rear–Designer To edge of side - 24" (61.0 cm) - includes door panel
With door open - 49" (124.5 cm)
Cutout width
Cutout height
Cutout depth
Electrical requirements
5' (1.8 m) electrical cord 3 prong plug supplied with unit
Water-heating element rating 200 model - 1200 watts
Inlet water temperature
Dishwasher will perform properly with cold water
Inlet water pressure operating range
Inlet water hose 5' (1.5 m) braided stainless steel water line with 3/8" (0.95 cm) compression
Drain hose 7' (2.13 m) 1/2" (1.3 cm) ID "crimp-proof" flexible drain hose
attached to dishwasher, connections provided for 5/8" (1.6 cm),
3/4" (1.9 cm) or 1" (2.5 cm), cut as required
Drain hose high loop required Height from floor - 20" (51.0 cm) min.
Approximate shipping weight 200 model -147 lbs. (66.7 kg) 325 model -152 lbs. (68.9 kg) 450 model -157 lbs. (71.2 kg)
7
200/325/450 Models
23-7/8" (60.6 cm)
33-7/8" (86.0 cm) min.
35" (89.0 cm) max.
24" (61.0 cm)
34" (86.4 cm) min.
35" (89.0 cm) max.
24" (61.0 cm)
15.0 amps, 120VAC/60 Hz;
325/450 models - 1400 watts
120°F (49°C) recommended;
Note: Cycle times will vary
10 to 125 psi (.69 to 8.62 bar)
fitting connected to dishwasher