Heat-N-Glo 8000TRD Installer's Manual page 11

CAP
STRAIGHT UP
VERTICAL VENTING
V (FT.)
40' MAX. (12.4 M)
NOTE: On vertical venting
configurations over 10 feet
install the flue restrictor
(385-128). See flue restric-
tor installation instructions.
Figure 6.
Straight Up Vertical Venting
Flue Restrictor Instructions
1. Remove Exhaust Shield using a 1/4" nut driver by
removing the four screws securing it in place (see
Figure 7).
V
EXHAUST
SHIELD
FLUE
RESTRICTOR
Figure 7
2. Break the Flue Restrictor into two pieces. Do this
by bending the part back and forth until it breaks
(see Figure 8).
Figure 8.
15
BREAK
HERE
Flue Restrictor