Motorola DCX3200 Installation Manual page 57

4 DIAGNOSTICS
Field
AUDIO S/PDIF
OSD Display
N/A
IEC958PCM
®
Dolby Digital
LFE: Low
Frequency Effect
OSD Display
0
1
Muting State and
Method
OSD Display
Description
Indicates S/PDIF Mode as set by application software.
Description
Audio S/PDIF mode is not applicable.
PCM audio selected.
®
For Dolby Digital selection, the following speaker selection is set:
1/0 right front or left front
2/0 right front and left front
3/0 right front and left front and center
2/1 right front and left front and (right rear or left rear)
3/1 right front and left front and center and (right rear or left rear)
2/2 right front and left front and right rear and left rear
3/2 right front and left front and center and right rear and left rear
The LFE indicates if the nomenclature low frequency effects are available in the
Dolby ®
Digital audio stream as indicated if the "0.1" is present in the Dolby
5.1 nomenclature (for example, "Dolby
Description
LFE is not available
LFE is available (for example, "Dolby
The Audio and Video Mute Status indicates if the audio and/or video have been
muted by the software. The audio mute is either On or Off. The Video Mute
describes the MPEG muting method selected by the software and indicates if the
output video is in the mute state by displaying On or Off, followed by the mute
method. Methods include:
Description
®
Digital 5.1 surround"). Valid values include:
®
Digital 5.1 surround").
49
®
Digital