Panasonic WV-CW384E Operating Instructions Manual page 33

3. Move the cursor to the center of a blemish position until its
appearance becomes less obvious. Finally, press the [SET]
button.
→ The horizontal and vertical positions (coordinate) of the
blemish will be displayed with a 6-digit number on the sec-
ond bottom line.
→ The blemish position is registered to be compensated.
→ The screen returns to the "PIX OFF" menu that displays the
number followed by an asterisk if it has been registered.
4. Repeat above steps as necessary.
5. To cancel a registration, select an asterisked number in the "PIX OFF" menu and press the [SET] button.
→ The "PIX OFF" assignment screen opens.
Hold down the the [LEFT] and [RIGHT] buttons simultaneously for 2 seconds or more.
→ The "PIX OFF" menu appears displaying the number without an asterisk if its registration has been cancelled.
17-5. To reset to the default settings (CAMERA RESET)
1. Select "CAMERA RESET".
→ The "→PUSH SW" is highlighted.
2. While holding down the [LEFT] and [RIGHT] buttons, press the [SET] button for 2 seconds or more.
→ The camera will return to the default settings.
Note:
• "PIX OFF" setting cannot be initialized.
17-6. The serial number of the camera will be displayed. (SER. NO.)
33