Panasonic WV-CW384E Operating Instructions Manual page 11

4. Secure the camera to the camera mount bracket with the 3 camera fixing screws (accessories).
Camera main body
Camera fixing screw x3 (M4 x 8) (accessories)
5. Remove the screw from the mounting boss for safety wire of the camera mount bracket and secure the safety wire with the
screw.
Important:
• Ensure that the safety wire is firmly secured. Recommended tightening torque: 0.59 N·m
Important:
<Waterproof treatment>
• To install this product outdoors, be sure to
waterproof the cables. The camera main
body is waterproof, but the mount bracket
and adapter box are not waterproof.
• To install this product outdoors, use water-
proof silicon rubber or the like to apply
waterproof treatment to the camera mount
bracket, adapter box, cable access hole,
screw holes, and screws.
• To install this product on a wall, face the drain slit of the camera mount bracket downward. Do not block the drain slit.
Do not waterproof the drain slit, either.
• Be sure to use the supplied waterproof tape at the connection parts of the power cord and video output cable to apply
waterproof treatment.
<How to wind the supplied waterproof tape>
• Stretch the tape by approx. twice (see the illustration at right) and
wind it around the cables. Insufficient tape stretch causes insuffi-
cient waterproofing.
• Wind the cable with tape in a half-overlapping manner.
Safety wire
Video output cable
Power cord
Camera mount bracket
Power cord
Video output cable
Mounting boss for safety wire
Video output cable
Power cord
Cable clamp
Drain slit
Camera mount bracket
Stretch the tape to approx. twice.
Twice in length
11