Panasonic WV-CW384E Operating Instructions Manual page 19

Color cctv cameras
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 1
6. Secure the camera to the camera mount
bracket with the 3 camera fixing screws
(accessories).
Pass the video output cable, and power cord
and safety wire through the camera mount
bracket and secure the safety wire to the
camera mount bracket.
Important:
• Be sure to use the screws that were removed
from the tripod head.
Recommended tightening torque: 0.59 N·m
7. Mount the sunshield on the camera body with the 4 sunshield mounting screws (accessories) after removing the sunshield
backside.
⁄0
When the tripod socket (accessory) is used (when a different camera mount bracket is used)
1. Remove the 4 tripod head fixing screws from the camera body and remove the tripod head.
Disassemble the tripod head and pull out the video output cable and power cord.
2. Mount the tripod socket (accessory) with the 4 mounting
screws for tripod socket (accessories).
Camera fixing screw x3
(M4 x 8) (accessories)
Tripod head fixing
screw x4
Camera main body
Sunshield mounting screw x4 (M3 x 6) (accessories)
Rear part of sunshield
Camera mount
bracket
Camera main body
2. Mount the tripod socket
(accessory).
Mounting screw
for tripod socket x4
(M3 x 8) (accessories)
1. Remove the tripod head.
19

Advertisement

Table of Contents
loading

This manual is also suitable for:

Wv-cw380Wv-cw380gWv-cw384

Table of Contents