Advertisement
Open error
1. Time out error by OPEN position cannot detect.
Close error (ANGLE 1 error)
1. Time out error by ANGLE 1 position cannot detect.
Angle positioning error
Moving to 10 degrees (ANGLE 2 error)
1. Time out error by ANGLE 2 position cannot detect at moving to open position.
2. Missing to ANGLE 1 and detected ANGLE 2 position at moving to open position.
3. Time out error by ANGLE 2 cannot detect at moving close position.
Moving to 20 degrees (ANGLE 3 error)
1. Time out error by ANGLE 3 position cannot detect at moving to open position.
2. Missing to ANGLE 2 and detected ANGLE 3 position at moving to open position.
3. Time out error by ANGLE 3 cannot detect at moving close position.
Moving to 30 degrees (ANGLE 4 error)
1. Time out error by ANGLE 4 position cannot detect at moving to open position.
2. Missing to ANGLE 3 and detected ANGLE 4 position at moving to open position.
3. Time out error by ANGLE 4 cannot detect at moving close position.
Abnormal switch position at moving panel
The Panel move to open and close position, detected abnormal switch position.
4.9
Running mode
Indication
Explanation
RUNNING1 MECHA Door mecha running 1 Panel close → Panel open
RUNNING2 MECHA Door mecha running 2 Panel close → Panel open → Panel detach position → Panel angle
DVD + Door mecha running1 Loading → Eject → Wait for 5 seconds + Door open/close
RUNNING4 DVD
DVD + Door mecha running2 Loading → Eject → Wait for 5 seconds + Door open/close
RUNNING5 DVD
DVD + Door mecha running3 Loading → Playback → Eject → Wait for 5 seconds + Door open/close
RUNNING6 DVD
DVD + Door mecha running4 Loading → Playback → Eject → Wait for 5 seconds + Door open/close
RUNNING7 DVD
DVD + Door mecha running5 Loading → Playback → Eject → Wait for 5 seconds + Door open/close
RUNNING8 DVD
DVD + Door mecha running6 Loading → Playback → Eject → Wait for 5 seconds + Door open/close
RUNNING9 DVD
* Cancellation of running1,2 : Press the [EJECT] key
* In running 1,2 cancellation, a door does not stop at the position and moves to a panel position.
* Cancellation of running3 to 8 : Press the [POWER] key
* The number of count and an error cord are displayed in running.
Playback contents in a running mode
• CD
The first track is played for 30 seconds. → The last track is played for 30 seconds.
• DVD
2 layer disc (Pit disc)
Title 1 (the L0 layer internal circumference) is played for 30 seconds. → Title 12 (L0 layer circumference) is played for 30 seconds.
→ Title 24 (L1layer internal circumference) is played for 30 seconds.
2 layer disc (Recordable disc)
Title 1 (the L0 layer internal circumference) is played for 30 seconds. → Title 12 (L0 layer circumference) is played for 30 seconds.
→ Title 24 (L1layer internal circumference) is played for 30 seconds.
1 layer disc
First chapter of title 1 is played for 30 seconds. → The last chapter of title 1 is played for 30 seconds.
Detail
Operation contents of 1 cycle
3 position → Panel angle 1 position → Panel angle 2 position
(The last track is played in the case of less than till the last for 30 seconds.)
Error code
(Service mode)
0A0001
0B0006
0D0021
0D0022
0D0023
0E0031
0E0032
0E0033
0F0041
0F0042
0F0043
0A0000
In mecha
In disc
error
error
-
-
RETRY
Retry
-
NO RETRY
Stop
-
Stop
-
Retry
-
Stop
Stop
Retry
Stop
Stop
Retry
Retry
Retry
(No.MA446<Rev.001>)1-21
Advertisement
