Advertisement
Quick Links
Advertisement
Related Manuals for Nady Systems 401
Summary of Contents for Nady Systems 401
-
Page 2: Table Of Contents
Thank you for purchasing a Nady 401 VHF Wireless Microphone System and congratula- tions on your choice. The 401 VHF is by far the best price/performance value available in multiple channel wireless systems. Please read the instructions in this manual completely before operating your unit. -
Page 3: System Features
401 Receiver 1. Rackmounting the Receiver The 401 receiver is supplied with RACK EARS (1) which can be attached with the screws provided on the front of the side panels to enable rackmounting. (Note: Do not mount the receiver in a rack directly above an amplifier or other source of high heat –... - Page 4 “live” if the transmitter is on.] If you want to use the 401 VHF as its own mixer, you can connect to the MIX AF OUTPUT (10B) which provides a mixed output of up to all four channels, with the relative volume of each channel in the mix determined by that channel’s VOLUME CONTROL (11).
- Page 5 ON position. Adjust the volume of the receiver as per the Audio Output Microphone Connection section of the above 401 receiver instructions. The AF LEVEL LED DISPLAY (9) on the 401 receiver will light up to 5 LEDs (4 green and 1 red) for all input signals.
-
Page 6: Wlt-15 Lavalier/Lapel Or Headworn Microphone
Audio Output Microphone Connection section of the above 401 receiver instructions. The AF LEVEL LED DISPLAY (9) on the 401 receiver will light up to 5 LEDs (4 green and 1 red) for all input signals. Occasional flickering on and off during use of the top red LED indicator in this display is normal, however if the red LED stays on continuously, it means the signal is too loud and there is the possibility of overload distortion. -
Page 7: Wgt-15 Instrument Bodypack Transmitter
The AF LEVEL LED DISPLAY (9) on the 401 receiver will light up to 5 LEDs (4 green and 1 red) for all input signals. Occasional flickering on and off during use of the top red... - Page 8 9V battery. Remember to turn the transmitter off when not in use. b. The Link 2 is now ready to use. The AF DISPLAY LEDs (9) on the 401 receiver should now be lit, indicating a received signal from the transmitter. When ready to speak, slide the transmitter switch to the ON position and adjust the volume of the receiver as per the Audio Output Microphone Connection section of the above 401 receiver instructions.
-
Page 9: Specifications
4 unbalanced adjustable and single mixed (all four channel) 1/4” audio out jacks 2.1 mm barrel-type DC input jack (tip=positive) Power ON; 5-LED AF level displays, TX on 401 1.75” x 7.5” x 16.5” (4.4 x 19 x 42 cm) 4.5 lbs (2 Kg) -
Page 10: Service
S E R V I C E (U.S.) Should your Nady 401 Wireless Microphone System require servicing, please contact the Nady Service Department via telephone at (510) 652-2411 or e-mail to service@nady- wireless.com for a Return Authorization (R/A) Number and a service quote (if out of warran- ty).